816488

Carat BS-1805 Manual

42
Zoom out
Zoom in
Previous page
1/114
Next page
GB
42
Look for this symbol to point out important safety precautions. It means ATTENTION!!! Your safety is involved .
MOTOR AND ELECTRICAL REQUIREMENTS
WARNING: To reduce the risk of electrical hazards, fire hazards or damage to the tool, use proper circuit
protection. To reduce the risk of shock or fire, if the power cord is worn or cut, or damaged in any way,
have it replaced immediately.
WARNING: Do not permit fingers to touch the terminals of plug when installing or removing the plug
from the outlet to avoid injury or possible death from electrical shock.
MOTOR SAFETY PROTECTION
IMPORTANT: To avoid motor damage, this motor should be blown out or vacuumed frequently to keep
dust from interfering with normal motor ventilation.
1. Connect this tool to a power source with the appropriate voltage for your model.
2. If the motor won’t start, turn the switch “OFF” immediately and unplug the tool.
3. If the motor suddenly stalls while milling, release the trigger switch and unplug the tool. The motor may
now be restarted.
4. Fuses may "blow" or circuit breakers may trip frequently for the following reasons:
a. Motor Is Overloaded - Overloading can occur if you make too many start/stops in a short time.
b. Line voltages should not be more than 10% above or below the nameplate voltage. For heavy loads,
however, the voltage at motor terminals must equal the voltage specified for your model. Improper
or dull milling head is being used.
5. Most motor troubles may be traced to loose or incorrect connections, overload, low voltage, (such as
small size wire in the supply circuit) or to an overly long supply circuit wire. Always check the connections,
the load and the supply circuit whenever motor doesn’t work well. Check wire sizes and length with the
Wire Size Chart.
UNPACKING
WARNING: To reduce the risk of injury from unexpected starting or electrical shock, do not plug the
power cord into a power source outlet during unpacking and assembly. The cord must remain
unplugged whenever you are working on the tool.
Your tool is shipped complete in one box.
Remove the tool and all loose parts from the carton. Place all parts on a secure, stationary work surface and
look the machine over carefully.
LIST OF PARTS
List of Contents
Basic Assembly....................................1
Operator’s Manual.............................1
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carat BS-1805 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carat BS-1805 in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian as an attachment in your email.

The manual is 3.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info