816488

Carat BS-1805 Manual

41
Zoom out
Zoom in
Previous page
1/114
Next page
41
GB
TO REDUCE THE RISK OF INJURY FROM JAMS, SLIPS OR THROWN PIECES
• To reduce the risk of burns or other fire damage, never use the machine near flammable liquids, vapors or
gases,
• Make sure all clamps are tight and there is no excessive play in any parts,
• Keep Work Area Clean. Cluttered areas and benches invite accidents. Floor must not be slippery.
Know Your Machine. Read and thoroughly understand the Operator’s Manual and labels affixed to the
tool. Learn its applications and limitations as well as the specific potential for hazards peculiar to this tool. To
reduce the risk of injury from accidental contact with moving parts, don’t do layout, assembly, or setup work
on the machine while any parts are moving.
WHENEVER MACHINE IS RUNNING
WARNING: Don’t allow familiarity (gained from frequent use of the Power tool ) cause a careless
mistake. A careless fraction of a second is enough to cause a severe injury.
If the machine makes an unfamiliar noise or vibrates a lot, STOP IMMEDIATELY. Turn
the tool OFF. Unplug the machine. Do not restart until finding and correcting the problem.
Make sure all visitors, bystanders and children are clear of tool and work piece.
BEFORE FREEING JAMMED MATERIAL
• Turn tool ”OFF” by releasing trigger switch,
• Wait for all moving parts to stop,
• Unplug the machine.
NEVER LEAVE RUNNING TOOL UNATTENDED
• Turn power “OFF”
• Wait for all moving parts to stop,
• Unplug the machine
WARNING: The operation of any power tool can result in foreign objects being thrown into your eyes,
which can result in severe eye damage. Before beginning tool operation always wear safety goggles
with side shields and a full-face shield when needed. We recommend a Wide Vision Safety Mask for use
over eyeglasses or standard safety glasses with side shields.
MAKE WORKSHOP CHILD PROOF
Lock the shop.
Disconnect master switches.
Store tool away from children and others not qualified to use the tool.
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carat BS-1805 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carat BS-1805 in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian as an attachment in your email.

The manual is 3.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info