475743

Canton Car-Audio-Systems 2010-2012 Manual

14
Zoom out
Zoom in
Previous page
1/20
Next page
Installing the loudspeakers
Choose the most appropriate position for installing the loudspeakers. Using the measurements given in the data sheet, check the
suitability of the location in the vehicle for installation. Ensure that the loudspeakers do not touch or affect the operation of any
moveable parts (door handle, window handle, tailgate mechanism, etc).
Installation in the original installation locations
If a Canton 2-way system is installed in the original installation locations, once the door panel and the original loudspeakers, if
available, have been removed the woofer can be fitted. Check in advance whether you may need a vehicle specific
installation adapter.
Installation in the trunk
Firstly, using a template, mark the drill holes and cut-outs required then cut these out of your trunk.
Remove the grille from the loudspeaker. Ensuring correct polarity, connect the wires to the loudspeakers. Position the grille with
the loudspeaker over the drill holes in the installation area and screw fasten them. Affix the enclosed, self-adhesive felt strips to
the loudspeaker grille and fit this accurately.
Rigidity of the trunk
Ensure that fitting the loudspeaker system does not cause the trunk to lose its rigidity. If necessary, strengthen the installation
area. In some vehicles it may be useful to replace the original boot with a chipboard or MDF panel or a soundboard.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canton Car-Audio-Systems 2010-2012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canton Car-Audio-Systems 2010-2012 in the language / languages: English, German as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info