General operating instructions
Canton car-audio-systems are specially designed for use in vehicles and are tuned for this type of use.
To enjoy your Canton loudspeakers for as long as possible please note the following: when installing the loudspeakers please
protect them from spray water or damage from, for example, body parts or moveable parts in the vehicle.
Amplifier
Canton loudspeakers are suitable for amplifier operation, even though the power output of these components is higher than the
load given in the technical data for the speaker system. In fact, the loudspeakers are at greater risk from low power amplifiers as,
by turning up the loudspeaker volume control and tone control to try to obtain more acoustic pressure, they can be overdriven
and produce distortion through what is known as ‘clipping’ that is particularly likely to damage the tweeters in the system. When
setting the loudspeakers, listen for any distortion and, if necessary, turn down the volume immediately.
Avoid overloading the loudspeakers through incorrectly fitted, overdriven or incorrectly set amplifiers.
Accessories
Fitting the system is easier when using the original accessories. Screws, cable clips and small fixing materials are supplied for easy
loudspeaker installation. Various assembly adapters for the tweeters are also enclosed with the component systems.
See the included list of accessories.