532257
121
Zoom out
Zoom in
Previous page
1/142
Next page
Chapter 11 119
Troubleshooting
Error No.: 300 Is Displayed
Error No.: 1700 Is Displayed
Error No.: 2001 Is Displayed
Cause Action
The machine is not ready. Ensure that the [ON/OFF] lamp on the Operation Panel is on.
If the lamp on the Operation Panel is off, turn the machine ON.
If the Alarm lamp is on, an error may have occurred in the machine. For
details on how to resolve the error, refer to “An Error Message Is
Displayed On The LCD” on page 99.
Machine is not properly connected. Ensure that the USB cable is securely connected to the computer.
z If using a switching hub or other device, disconnect the machine and
reconnect it directly to the computer and try printing again. If
successful, the problem may have been with the device.
z There could also be a problem with the cable(s). Replace the cable(s)
and try printing again.
Machine you want to use is not
selected on the [Printer] popup
menu on the [Print] dialog box.
Select your machine on the [Printer] pop-up menu on the [Print] dialog
box.
If your machine does not appear on the [Printer] pop-up menu, add the
machine following the procedures described in the Easy Setup
Instructions.
Cause Action
The waste ink absorber is
almost full.
Ink used for cleaning is absorbed in a waste ink absorber inside the
machine.
Press [OK] to cancel the error so that you can continue printing. Once the
waste ink absorber becomes completely full, printing cannot be done until
the waste ink absorber is replaced.
Canon recommends that you contact a Canon service representative as
soon as possible.
Cause Action
A specified period of time has
elapsed without receiving a
response from the digital camera. /
The digital camera or digital video
camcorder connected is not
compatible with this machine.
Disconnect the camera cable and reconnect the cable.
Depending on the model or brand of your device, you may have to select a
print mode compliant with PictBridge before connecting the device.
You may also have to turn ON the device or select Play mode manually
after connecting the device to the machine. Perform the necessary
operations according to the instruction manual supplied with your device.
If the error is still unresolved, there is a possibility that you are using a
digital camera or digital video camcorder that is not supported by this
machine. Use a digital camera or digital video camcorder compatible with
this machine.
121


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma MP450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma MP450 in the language / languages: English as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info