532257
120
Zoom out
Zoom in
Previous page
1/142
Next page
118 Chapter 11
Troubleshooting
An Error Message Appears On The Screen
Service Error 5100 is Displayed
Writing Error/Output Error/Communication Error
Cause Action
Movement of the FINE Cartridge
Holder is blocked.
Clear the paper jam or foreign object that is preventing the FINE Cartridge
Holder from moving, cancel printing from your computer, then turn OFF
the machine and turn it back ON again.
Cause Action
Machine is not ready. Ensure that the [ON/OFF] lamp on the Operation Panel is on.
If the lamp on the Operation Panel is off, turn the machine ON.
If the Alarm lamp is on, an error may have occurred in the machine. For
details on how to resolve the error, refer to “An Error Message Is
Displayed On The LCD” on page 99.
Paper is not loaded. Load paper and press [OK].
If this error (Paper is not loaded) is ignored for a certain period of time, an
additional message may be displayed.
Printer port setting does not match
the interface connected to the
machine.
Check the printer port settings.
1. Click [Start] and select [Control Panel], [Printers and Other Hardware],
and then [Printers and Faxes].
For non-Windows XP, click [Start], select [Settings], and then [Printers].
2. Select the icon of your machine.
3. Open the [File] menu and select [Properties].
4. Click the [Ports] tab (or the [Details] tab) to confirm the port settings.
A USB port is selected if either USBnnn (Canon MP450) or MPUSBPRNnn
(Canon MP450) (where n is a number) is indicated.
If the port setting is not correct, change the port setting according to the
interface you are using on the [Ports] tab (or the [Details] tab), or reinstall
the MP driver.
Machine is not properly connected. Ensure that the USB cable is securely connected to the computer.
z Disconnect the machine and reconnect it directly to the computer and
try printing again. If successful, the problem may have been with the
device.
z There could also be a problem with the cable(s). Replace the cable(s)
and try printing again.
MP driver is not installed properly. Uninstall then reinstall the MP driver.
1. Click [Start], and select [All Programs] (or [Programs]), the name of your
machine, and [Uninstall].
2. Follow the on-screen instructions to uninstall the driver.
3. Follow the procedures described in the Easy Setup Instructions and
reinstall the MP driver.
120


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma MP450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma MP450 in the language / languages: English as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info