37306
92
Zoom out
Zoom in
Previous page
1/128
Next page
90 Chapter 10
Troubleshooting
Ink Does Not Come Out/Printing Is Blurred/Colors
Are Wrong/White Streaks/Straight Lines Are
Misaligned/Cannot Print To End Of Job
Cause Action
FINE Cartridge is empty. Replace the FINE Cartridge, and close the Scanning Unit.
If printing is not finished yet, just press [OK] on the machine to continue
printing in the “no ink” state. Replace the FINE Cartridge with a new one
as soon as possible after printing has finished. The machine may be
damaged if printing is continued under the ink out condition. See
“Replacing A FINE Cartridge” on page 68.
FINE Cartridge is not installed
correctly.
Open the Scanning Unit and make sure that the correct FINE Cartridge is
inserted in each position. See “Replacing A FINE Cartridge” on page 68.
Incorrect paper type. When printing directly from a digital camera, on the Operation Panel,
confirm that the <MEDIA TYPE> selected matches the paper loaded.
When printing from a computer, check the following.
On the [Main] tab of the printer driver, ensure that the [Media Type]
selected matches the paper loaded.
In the Print dialog box of the printer driver, select [Quality & Media] from
the pop-up menu, and then ensure that the [Media Type] selected matches
the paper loaded.
FINE Cartridge nozzles clogged or
shifted.
Print the nozzle check pattern to check for uneven ink output.
See “Printing The Nozzle Check Pattern” on page 77.
z ink supply is uneven.
See “FINE Cartridge Cleaning” on page 79.
See “FINE Cartridge Deep Cleaning” on page 79.
z If straight lines are shifted.
See “Aligning The FINE Cartridge” on page 80.
Print Quality is not set properly. Be sure to set the [Print Quality] setting to [High] in Windows, or [Fine] in
Macintosh.
1. Open the printer properties dialog box.
2. On the [Main] tab, click [High] for the [Print Quality] setting.
When you cannot choose the [High] setting or when the print quality does
not improve, select [Custom], click [Set] and then adjust the [Quality bar]
for higher print quality.
1. Open the [Print] dialog box.
2. Select [Quality & Media] from the pop-up menu and then click [Detailed
Setting].
3. Drag the [Print Quality] slide bar to the [Fine] end.
Media not loaded printside up. Check that your paper is loaded with the correct print side facing up.
The paper stack exceeds the
capacity of the Auto Sheet Feeder.
If the paper stack exceeds the Load Limit Mark, or exceeds the capacity of
the Auto Sheet Feeder, reduce the amount of paper. See “Recommended
Paper” on page 17.
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma MP170 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma MP170 in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info