37306
91
Zoom out
Zoom in
Previous page
1/128
Next page
Chapter 10 89
Troubleshooting
Cannot See The Display On The LCD/LED
E, 9 Depending on the model or brand of your device, you may have to select a
print mode compliant with PictBridge before connecting the device.
You may also have to turn on the device or select Play mode manually
after connecting the device to the machine. Perform necessary operations
according to the instruction manual supplied with your device.
If the error is still unresolved, there is a possibility that you are using a
digital camera or digital video camcorder that is not supported by this
machine. Use a digital camera or digital video camcorder compatible with
this machine.
E, 1, 4 The FINE Cartridge may not be the compatible with this machine. Install
the appropriate FINE Cartridge. If lines are misaligned or the resulting
output is not satisfactory, carry out the FINE Cartridge Alignment.
E, 1, 5 FINE Cartridge errors have occurred. Replace the FINE Cartridge.
E, 1, 6 This FINE Cartridge may have previously been used, or the ink may have
run out. The function for detecting the remaining ink level will be disabled
since the remaining ink level cannot be correctly detected. If you want to
continue printing without this function, press [Black] or [Color]. Canon
recommends to use new genuine Canon Cartridges in order to obtain
optimum qualities.
E, 1, 9 The size of the document cannot be correctly detected or the document is
too small when the Fit-to-Page copying is selected. Make sure the
document meets the requirements and correctly loaded on the Platen
Glass. Then reload the document and press [Black] or [Color]. See
“Setting Documents” on page 15
E, 2, x
E, 3, x
E, 4, x
An error requiring servicing might have occurred. Turn OFF the machine,
and unplug the power cord of the machine from the power supply. After a
while, plug the power cord of the machine back in and turn ON the
machine. If the same error occurs, contact a Canon service representative.
Cause Action
The Machine is not turned ON. You have not pressed [ON/OFF].
The machine will power ON and the LCD/LED will display a message when
you connect the power cord and press [ON/OFF].
The LED may be in the Power Saver
mode (MP150).
Press any button to turn on the LED again.
Message Action
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma MP170 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma MP170 in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info