37306
90
Zoom out
Zoom in
Previous page
1/128
Next page
88 Chapter 10
Troubleshooting
<E> and <error code> are alternately displayed on the LED of MP150.
CHECK INK
U161
U162
This FINE Cartridge may have previously been used, or the ink may have
run out. The function for detecting the remaining ink level will be disabled
since the remaining ink level cannot be correctly detected. If you want to
continue printing without this function, press [OK]. Canon recommends to
use new genuine Canon Cartridges in order to obtain optimum qualities.
CHECK INK
U140
The FINE Cartridge may not be the compatible with this machine. Install
the appropriate FINE Cartridge. If lines are misaligned or the resulting
output is not satisfactory, carry out the FINE Cartridge Alignment.
CHECK PRINTER An error requiring servicing might have occurred. Turn OFF the machine,
and unplug the power cord of the machine from the power supply. After a
while, plug the power cord of the machine back in and turn ON the
machine. If the same error occurs, contact a Canon service representative.
Note
If the ON/OFF Lamp (green) and Alarm Lamp (orange) flash alternately,
disconnect the USB cable from the machine, and then turn the machine OFF
and then unplug the machine from the power supply for a while. Plug the
machine back in and turn the machine back ON.
If the problem remains, contact a Canon service representative.
Message Action
E, 2 Reload the paper correctly and press [Black] or [Color].
E, 3 If paper has jammed in the machine, clear the jam, reload the paper in the
machine correctly and then press [Black] or [Color].
E, 4 The ink may have run out. Replace the FINE Cartridge, and close the
Scanning Unit. If lines are misaligned or the resulting output is not
satisfactory, carry out the FINE Cartridge Alignment. If printing is in
progress and you want to continue printing, press [Black] or [Color]. Then
printing can continue under the ink out condition with the FINE Cartridge
installed. Replace the empty FINE Cartridge immediately after the printing.
The resulting print quality is not satisfactory, if printing is continued under
the ink out condition.
E, 5 The FINE Cartridge may not be installed properly, or the Cartridge may not
be the compatible with this machine. Install the appropriate FINE
Cartridge. If lines are misaligned or the resulting output is not satisfactory,
carry out the FINE Cartridge Alignment.
E, 7 Some FINE Cartridges are not installed in place. Install the FINE
Cartridges in the appropriate positions.
E, 8 Waste ink absorber is almost full. Ink used for cleaning is absorbed in a
waste ink absorber placed in the machine. <E, 8> indicates that the waste
ink absorber is nearly full. Press [Black] or [Color] to cancel the error so
that you can continue printing. If this error occurs, replacement of the
waste ink absorber and maintenance of the machine are required. Canon
recommends to contact a Canon service representative as soon as
possible. Once the waste ink absorber becomes completely full, printing
cannot be done until the waste ink absorber is replaced.
Message Action
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma MP170 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma MP170 in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info