583172
51
Zoom out
Zoom in
Previous page
1/60
Next page
47
Back of Paper is Smudged/Paper Does Not Feed Properly/Printed
Surface is Scratched
Possible Cause Try This
Inside of the printer is
dirty
If the inside of the printer is dirty, printed paper may be smudged. Follow the steps described below to
clean the inside of the printer.
(1) Ensure that the printer is turned on and there is no paper loaded in the auto sheet feeder.
(2) Place A4/Letter-sized plain paper in landscape, horizontally fold it in half.
(3) Unfold the paper, and load the paper in the auto sheet feeder with the inverted-V edge down.
(4) Press the Configuration
ConfigurationConfiguration
Configuration button repeatedly to select MAINTENANCE
MAINTENANCEMAINTENANCE
MAINTENANCE.
(5) Use the
buttons to select BOTTOM CLEANING
BOTTOM CLEANINGBOTTOM CLEANING
BOTTOM CLEANING and then press the OK
OKOK
OK button.
Paper will be ejected.
If protrusions inside the printer are stained, wipe ink off the protrusions using a swab or the like.
Before cleaning, be sure to turn off the printer.
Paper feed roller is dirty Follow the steps described below to clean the paper feed rollers.
Since the paper feed roller cleaning exhausts the paper feed roller, perform only when it is needed.
(1) Ensure that the printer is turned on. If the paper is loaded in the printer, remove the paper.
(2) Press the Configuration
ConfigurationConfiguration
Configuration button repeatedly to select MAINTENANCE
MAINTENANCEMAINTENANCE
MAINTENANCE.
(3) Use the buttons to select ROLLER CLEANING
ROLLER CLEANINGROLLER CLEANING
ROLLER CLEANING and then press the OK
OKOK
OK button.
The paper feed roller will rotate as it cleans.
(4) Repeat (2) through (3) twice.
(5) Load three or more sheets of A4/Letter-sized plain paper lengthways in the auto sheet feeder.
(6) Press the Configuration
ConfigurationConfiguration
Configuration button repeatedly to select MAINTENANCE
MAINTENANCEMAINTENANCE
MAINTENANCE.
(7) Use the buttons to select ROLLER CLEANING
ROLLER CLEANINGROLLER CLEANING
ROLLER CLEANING and then press the OK
OKOK
OK button.
The paper that is loaded in the printer will feed through the printer and be ejected.
(8) Repeat (6) through (7) three times.
If repeating this procedure three times or more does not solve the problem, contact the Customer Care
Center.
PIXMA_iP6210D_DPG_US.book Page 47 Thursday, June 9, 2005 4:05 PM
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma iP6210D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma iP6210D in the language / languages: English as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon Pixma iP6210D

Canon Pixma iP6210D Installation Guide - English - 2 pages

Canon Pixma iP6210D Quick start guide - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info