583172
49
Zoom out
Zoom in
Previous page
1/60
Next page
45
WASTE INK NEAR FULL The printer has a built-in waste ink absorber to hold the ink used during print head cleaning, for example.
This error message indicates that the waste ink absorber is nearly full.
Press the OK
OKOK
OK button to cancel the error so you can continue printing.
Before the waste ink absorber becomes completely full, contact the Customer Care Center. (You will need
to replace a particular part of the printer.)
Canon recommends that you call for service as soon as this error occurs. Once the waste ink absorber
becomes completely full, printing cannot be performed until the Waste ink tank is replaced.
INCOMPATIBLE
CAMERA
Disconnect the camera cable and reconnect it.
Depending on the model or brand of your device, you may have to select a print mode compliant with
PictBridge before connecting the device.
You may also have to turn on the device or select Play mode manually after connecting the device to the
printer.
Perform necessary operations according to the instruction manual supplied with your device.
If the error is still unresolved, there is a possibility that you are using a digital camera or digital video
camcorder that is not supported by this printer. Use a digital camera or digital video camcorder
compatible with this printer.
HEAD ALIGNMENT
ERROR
Possible causes are as follows:
Other than A4/Letter-sized plain paper is loaded.
Press the OK
OKOK
OK button to clear the error, and then load A4/Letter-sized plain paper in the auto sheet
feeder.
Print head nozzles are clogged.
Press the OK
OKOK
OK button to clear the error, and then print the nozzle check pattern to examine the print
head condition.
For information on how to print a nozzle check pattern, See “Printing the Nozzle Check Pattern” on
page 37.
The paper output slot has been exposed to a strong light source preventing current print head
alignment.
Press the OK
OKOK
OK button to clear the error and move the printer to a darker location.
After carrying out the above measures, if the problem continues after aligning the print head again, press the
OK
OKOK
OK button to clear the error, and then perform manual print head alignment. For details on manual print head
alignment, see “Adjusting the Print Head Manually” on page 46.
CHECK INK
U140
The FINE Cartridge may not be the compatible with this printer.
Install the appropriate FINE Cartridge. If lines are misaligned or the resulting output is not satisfactory,
carry out the Print Head Alignment.
CHECK INK
U161
U162
Possible causes are as follows:
This FINE Cartridge has previously been used.
Ink may have run out.
The function for detecting the remaining ink level will be disabled since the remaining ink level cannot be
correctly detected. If you want to continue printing without this function, press the OK
OKOK
OK button.
Canon recommends to use new genuine Canon cartridges in order to obtain optimum qualities.
CHECK PRINTER An error that requires contacting the Customer Care Center may have occurred. (POWER
POWERPOWER
POWER lamp and Alarm
AlarmAlarm
Alarm
lamp alternately.)
Disconnect the printer cable from the printer, and then turn the printer off and unplug the printer from the
power supply. Plug the printer back in and turn the printer back on after leaving it for a while.
If the problem remains, contact the Customer Care Center.
Message Try This
PIXMA_iP6210D_DPG_US.book Page 45 Thursday, June 9, 2005 4:05 PM
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma iP6210D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma iP6210D in the language / languages: English as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon Pixma iP6210D

Canon Pixma iP6210D Installation Guide - English - 2 pages

Canon Pixma iP6210D Quick start guide - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info