583172
50
Zoom out
Zoom in
Previous page
1/60
Next page
46
POWER Lamp and Alarm Lamp Flash Alternately
Ink Does Not Come Out/ Printing is Blurred/Colors are Wrong/White
Streaks
Adjusting the Print Head Manually
If the automatic print head adjustment does not work or if you wish to adjust
the print heads manually, follow the procedure below.
1. With the printer on, load a sheet of A4/Letter-sized plain paper in the
auto sheet feeder.
2. Press the Configuration
ConfigurationConfiguration
Configuration button repeatedly to select MAINTENANCE
MAINTENANCEMAINTENANCE
MAINTENANCE.
3. Use the buttons to select ALIGN PRINT HEAD
ALIGN PRINT HEADALIGN PRINT HEAD
ALIGN PRINT HEAD and then press the OK
OKOK
OK
button.
Possible Cause Try This
An error that requires
contacting the Customer Care
Center may have occurred
Disconnect the printer cable from the printer, and then turn the printer off and unplug the printer
from the power supply. Plug the printer back in and turn the printer back on after leaving it for a
while.
If the problem remains, contact the Customer Care Center.
Possible Cause Try This
A FINE Cartridge is not seated
properly/FINE Cartridge is
empty
Open the card slot cover first and the front cover next, and press up the FINE Cartridge to
install it properly.
Ensure that the specified FINE Cartridge is installed. If the specified FINE Cartridge is not used,
good printing color quality cannot be expected.
See “Replacing a FINE Cartridge” on page 40.
Incorrect media type On the operation panel, confirm that the media type selected matches the paper loaded.
Print head nozzles clogged or
shifted
Print the nozzle check pattern to check for uneven ink output.
When a specific color is missing from the nozzle check pattern, clean the print head.
If ink supply is uneven: See “Print Head Cleaning” on page 38.
If straight lines are shifted: See “Aligning the Print Head - Auto head align” on page 39.
Media not loaded print-side
up
Check that your paper is loaded with the correct print side facing up.
Follow the instructions packaged with your specialty media for loading and handling.
4. Examine the printed pattern and enter the
number of column “A” with fewest white
stripes using the buttons.
5. Press the OK
OKOK
OK button.
6. Repeat Steps (4) through (5) and enter
the pattern numbers up to column “N”.
SET VALUE
A 0
PIXMA_iP6210D_DPG_US.book Page 46 Thursday, June 9, 2005 4:05 PM
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma iP6210D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma iP6210D in the language / languages: English as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon Pixma iP6210D

Canon Pixma iP6210D Installation Guide - English - 2 pages

Canon Pixma iP6210D Quick start guide - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info