469759
4
Zoom out
Zoom in
Previous page
1/8
Next page
Connect the telephone line and any necessary external device,
and set the receive mode.
NOTE
• Before using your machine, you need to make
sure it is set for your telephone line type.
For details, see p. 6-4 of the Users Guide.
• Refer to the receive mode instructions after the
unit is powered on.
Connect the power cord.
IMPORTANT
• Before turning on the power, make sure the document cover A is closed.
03 04
07 08
ON/OFF(1sec.)
PUT IN CARTRIDGE
1 Plug the power
cord into a socket.
2 When you connect
the machine, the
Alarm light blinks,
and the messages
above should
appear in the LCD.
3 If nothing appears in the LCD,
press [ON/OFF (1 sec.)] to turn on
the machine.
•If you need to turn off the machine,
press [ON/OFF (1 sec.)] for one second.
PLEASE WAIT
PUT IN CARTRIDGE
Approx. 30 seconds
A
You can connect an external
device (telephone or answering
machine) if necessary.
Connect the telephone line
cord to the wall jack.
Turn over to
continue
Turn over to
continue
Telephone or answering machine
Telephone and answering machine
Built-in computer modem and telephone
Connect external devices as follows:
Telephone
line
Machine
Telephone
line
Machine
Telephone or
answering machine
Telephone
line
Machine
Computer
= Telephone line jack
= External device jack
Answering
machine
LINE TEL
Telephone
Telephone
TELLINE
Set the receive mode as follows:
1 On the operation panel, press [Fax], [Menu], then [Set].
Ex:
2 Use [2] or [3] to select the receive mode:
•Select:
–<FA X/TEL AUTO SW> to receive both faxes and voice calls
(a telephone must be connected to the machine).
–<FA X ONLY MODE> to receive faxes only.
<DRPD> if you have subscribed to a DRP (Distinctive Ring Pattern)
service offered by some companies. (For details, refer to the Quick
Reference Guide.)
<MANUAL MODE> to answer all voice and fax calls manually
(a telephone must be connected to the machine).
<ANS.MACHINE MODE> to receive faxes automatically and route
voice calls to an answering machine connected to your machine.
For more details on the different receive modes, refer to p. 9-1 of
the Users Guide.
RECEIVE MODE
FAX/TEL AUTO SW
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon MP 730 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon MP 730 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info