670856
24
Zoom out
Zoom in
Previous page
1/80
Next page
Preparing the Camera
24
Only when using a compatible CINE-SERVO
lens (A 71)
6 Connect the lens's 12-pin cable to the camera's
LENS terminal.
7Set the Q switch to ON.
8 On the lens's MENU screen, select the signal path
for data communication with the camera.
In the [Info] screen, set [I/Fprior] to [Mount].
Removing an EF Lens
1Set the Q switch to OFF.
If a CINE-SERVO lens is connected to the
camera's LENS terminal, disconnect the 12-pin
cable after turning off the camera.
2 While holding the bottom of the lens, turn the lens
mount handle clockwise until it stops and remove
the lens.
Make sure not to drop the lens when removing it.
3 Place the body cap back on the lens mount and
the dust caps back on the lens.
NOTES
About using an EF-S lens: This camera’s sensor is larger than the sensor size for which EF-S lenses
are designed (APS-C). When using EF-S lenses with this camera, you may notice peripheral
illumination fall-off or vignetting. To prevent this, you can use the [Camera Setup] > [EF-S Lens]
setting to change the sensor area that is used for producing the image. This setting digitally
enlarges the image by a factor of approx. 1.04 so the image quality will deteriorate slightly.
Depending on the lens's characteristics, the corners of the picture may seem darker due to light fall-
off or illumination drop. You can use the [Camera Setup] > [Periph.Illum.Corr.] setting to have the
camera compensate if it has the correction data available for the lens.
If you are using a compatible lens*, you can use the [Camera Setup] > [Zoom-Iris Correct.] setting
to have the camera adjust the aperture while zooming.
* Some EF lenses and CINE-SERVO lenses are not compatible with this function.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon ME200S-SH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon ME200S-SH in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info