670856
22
Zoom out
Zoom in
Previous page
1/80
Next page
Preparing the Camera
22
Preparing the Camera
This section outlines the basic preparations for the camera.
Adjusting the Black Balance
The first time you use the camera or if there is a noticeable change in the blacks of the video signal
(such as when ambient temperature changes considerably), you can have the camera adjust the black
balance automatically.
1 Set the Q switch to OFF and prepare the camera.
When using a compatible CINE-SERVO lens (A 71):
Attach the CINE-SERVO lens (A 23).
When using other lenses: Remove the lens if one is
attached to the camera, and attach the body cap to the
lens mount.
2 Set the Q switch to ON.
3 Press the ABB button.
Alternatively, you can use the [Camera Setup] > [ABB]
setting.
4 Select [OK] and then press SET.
The automatic black balance procedure will start. It will take approximately 40 seconds when the
frame rate is set to 23.98P.
5 When the message [Process completed successfully.] appears, press SET.
If the sensor is not completely shielded from light, [ABB error] will appear on the screen. Press
SET and repeat the procedure from the beginning.
NOTES
Adjusting the black balance is necessary in the following cases:
- After a long period of not using the camera.
- After sudden or extreme changes in ambient temperature.
- After resetting the camera's settings using either option in the [Other Functions] > [Reset]
setting.
During the adjustment of the black balance, you may notice some irregular displays appear on the
screen. This is not a malfunction.
After adjusting the black balance with a CINE-SERVO lens attached to the camera, you will need to
readjust the aperture.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon ME200S-SH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon ME200S-SH in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info