670856
23
Zoom out
Zoom in
Previous page
1/80
Next page
Preparing the Camera
23
Preparing the Lens
As much as possible, attach and remove the lens quickly and in a clean environment free of dust.
Refer also to the instruction manual of the lens used.
IMPORTANT
When attaching/removing a lens, avoid direct sunlight or strong light sources. Also, be careful not to
drop the camera or lens.
NOTES
After removing a lens or when a lens is not attached to the camera:
- Do not touch the lens’s surfaces, the lens mount or any components inside the lens mount area.
- Place the body cap back on the lens mount and the dust caps back on the lens. Clean any dust
or dirt from the body cap and dust caps before using them.
Attaching an EF Lens
1Set the Q switch to OFF.
2 Turn the lens mount handle clockwise until it stops.
3 Remove the body cap from the camera and any
dust caps from the lens.
4 Align the lens and mount making sure that the
index marks are aligned.
EF lenses: Align the red mark on the lens with the
red EF Lens mount index mark on the camera.
EF-S lenses: Align the white mark on the lens with
the white EF-S Lens mount index mark on the
camera.
5 After the lens is attached to the camera, without
turning the lens, turn the lens mount handle
counter-clockwise until it is tightened firmly.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon ME200S-SH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon ME200S-SH in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info