Manual Canon dr-5060f (page 23 of 89) (English)

212525

Zoom out

Zoom in

1/89

Scanning a Document

Before You Start Scanning

◆ About Backing Up to Microfilm

When the scanner is set to the Backup mode, all scanned document sheets are

backed up to microfilm.

• If a system error or paper jam occurs during scanning and stops paper feed,

clear the paper jam, for example, and make sure that the image of the last

original page output from the scanner has been properly recorded to the

computer. As you cannot confirm the image that has been photographed to

film, discontinue the scan job, and repeat the procedure from scanning of the

original that jammed to continue scanning.

• There are two types of camera units for photographing scanning images to

microfilm: one for photographing in the Simplex mode, and the other for

photographing in the Duplex mode. (See “Scan Batch to File” P. 27)

When the camera unit for photographing in the Simplex mode is used, only the

front side of originals is photographed.

When the camera unit for photographing in the Duplex mode is used, both

sides of the originals are photographed to film even if Simplex scanning is

instructed in Scanning Utility 5060.

• Even if you have specified a size of paper smaller than the original at Page

Size, and you have set up scanning so that part of the original is scanned, the

whole area of the original is photographed to film.

• When function sheets or patch code sheets are used, you can set up scanning

in the Scanning Utility 5060 settings so that sheets are not saved as images.

However, be sure to perform this in the Backup mode. (See “Using Patch

Codes/Function Sheets” P. 47)

◆ About Separators

When scanned images are separated into separate files for each document stack,

patch code sheets are detected or press the New File button on the operation

panel to send the separator signal to the computer from the scanner.

• When “Auto New File” is set in Scanning Utility 5060, the New File key on the

scanner’s operation panel lights each time that scanning is discontinued, and

the separator signal is sent to the computer. (See “Separation” P. 65)

• n Scanning Utility 5060, the folder or file name to save images to is changed

and the file is separated by the separator signal. (See “Saving Multiple Page

Originals” P. 37)

• When “2LevelBlip” is enabled in Scanning Utility 5060, the microfilm is marked

with a “file mark” by the separator signal and images are separated

independently of “page marks.” (See “Separation” P. 65)

DUPLEX

Back

Front

File mark Page mark File mark

Downloaded from www.Manualslib.com manuals search engine

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Canon dr-5060f in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Canon dr-5060f Manual

Product: