212525

Canon dr-5060f Manual

22
Zoom out
Zoom in
Previous page
1/89
Next page
20
Before You Start Scanning
Before You Start Scanning
Before you start scanning, check the operation mode and feeding option on the
scanner’s operation panel.
A
FILMEF
Feeding Option
New File
Count Only
Manual
Auto
Semi-Auto
123456
Space/Trailer
Backup
Scanner
◆ About Scanner Operation Modes
The scanner operation mode can be verified by the state of the Backup key on the
scanner’s operation panel. In the Backup mode, the Backup key is lit, in the
Scanner Only mode, it is out, and in the Filmer Only mode, it is blinking. (See DR-
5060F Instructions “About Operation Modes” P. 40)
As Scanning Utility 5060 does not operate with the scanner in the Filmer Only mode,
be sure to set the scanner to either the Backup mode or the Scanner Only mode.
◆ About Feeding Options
The feeding option selection and operation procedure differ according to the
Feeding Option key setting. As the Feeding Option key setting is also reflected in
Scanning Utility 5050, check the Feeding Option key before you start scanning.
(See “Feeder Option” P. 63)
• When the Feeding Option key is out indicating [Remote] mode, scanning is
started when scanning is instructed in Scanning Utility 5060. Check the original
before you instruct start of scanning.
• When the Feeding Option lamp indicates the [Manual] mode, the document tray
rises, and the scanner stands by for loading of the document and instruction of
start of scanning. Instruct start of scanning in Scanning Utility 5060, and
manually load the original one sheet at a time.
• When the Feeding Option lamp indicates the [Auto] mode, the Start key turns
green and the scanner stands by for the original to be loaded when start of
scanning is instructed in Scanning Utility 5060. Scanning is automatically
started when the original is loaded on the document tray. Scanning is not
started when the original has already been loaded and start of scanning is
instructed in Scanning Utility 5060. To start scanning in this case, either press
the Start key, or remove the original and then put it back on the document tray.
• When the Feeding Option lamp indicates the [Semi-Auto] mode, the Start key
turns green and the scanner stands by for the Start key to be pressed when
start of scanning is instructed in Scanning Utility 5060. Load the original on the
document tray, and then press the Start key.
Backup key
Feeding Option key
Downloaded from www.Manualslib.com manuals search engine
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon dr-5060f at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon dr-5060f in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info