709431
35
Zoom out
Zoom in
Previous page
1/56
Next page
3 System Connections Connecting the Cables
35
Connecting the Camera Head
1. Turn the camera rotator clockwise so the IP controller is on top.
2. Connect the head interface cable to the IP controllers HEAD terminal (1).
3. Connect a LAN cable to the IP controllers (Ethernet) terminal (2).
4. Connect a power cable to the DC coupler connected to the main capture camera (3).
Connecting the Main Capture Camera
For details about connections to the main capture camera, refer to the instruction manual of the camera used.
1. Connect the supplied USB Type C cable, compatible with the main capture camera, to the IP
controllers CAMERA1 terminal and to the main capture camera (4).
2. Connect the supplied LAN cable to the IP controllers CAMERA2 terminal and to the main capture
camera (5).
3. Connect the supplied N3 cable to the IP controllers (N3 Remote) terminal and to the remote
control terminal on the main capture camera (6).
When connecting the N3 cables right angle connector to the (N3 Remote) terminal, make sure the
connector and cable are oriented in the direction of the main capture camera.
Connecting the Wide View Camera and Eyepiece Camera
When using a wide view camera and/or eyepiece camera, connect them to the IP controller. For details about these
cameras, refer to their respective instruction manuals.
1. Connect the wide view cameras USB cable to the IP controllers VIEW CAMERA terminal (7).
2. Connect the eyepiece cameras USB cable to the IP controllers EYEPIECE CAMERA terminal (8).
Organizing/Tidying Up the Cables
1. Gather all the cables running near the cable clamps fastener and tie them using the fastener.
2. Gather other cables as necessary and bundle them using cable ties or other means.
3. Verify that safety wires do not hinder the operation of any gears and other moving parts.
4. Turn the camera rotator and verify that no cables hinder the operation of other parts.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon CR-S700R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon CR-S700R in the language / languages: English as an attachment in your email.

The manual is 5,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info