709432
12
Zoom out
Zoom in
Previous page
1/37
Next page
3 System Connections Connecting the Cables
12
Attaching the Ferrite Core to the LAN Cable
Attach the supplied ferrite core to the end of the LAN cable (commercially available) used to connect to the PoE hub.
This will reduce noise interferences.
1. Place the ferrite core about 3 cm (1.2 in.) from the LAN
cables connector. Loop the cable once and close the ferrite
core.
Connecting the Devices
1. Turn off the IP controller (A 13).
2. Connect the IP controllers CAMERA1 terminal and the main capture camera (1) using a USB Type C
cable.
Use a USB cable compatible with the camera used.
3. Connect the IP controllers CAMERA2 terminal and the main capture camera (2) using a LAN cable.
4. Connect the IP controllers (N3 Remote) terminal and the remote control terminal on the main
capture camera (3) using an N3 cable.
5. When using a wide view camera, connect its USB cable to the IP controllers VIEW CAMERA terminal (4).
6. When using an eyepiece camera, connect its USB cable to the IP controllers EYEPIECE CAMERA
terminal (5).
7. Insert a battery pack into the main capture camera or power it from a power outlet using a DC coupler
and AC adapter (6).
8. Connect the LAN cables connector with the ferrite core to the IP controllers (Ethernet) terminal
and the other end to a PoE hub (7).
9. Connect the PoE hub to a power source (8).
10. Connect the control PC and FTP server to the PoE hub.
11. Turn on the IP controller (A 13).
Make sure to turn off the IP controller before connecting the main capture camera.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon CR-G100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon CR-G100 in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info