709432
10
Zoom out
Zoom in
Previous page
1/37
Next page
3 System Connections Mounting the IP Controller
10
3 System Connections
Mounting the IP Controller
If you are not using a CR-S700R Robotic Camera Head, turn the IP controller
upside-down and attach the standalone base adapter to the IP controllers
top surface (now at the bottom). Use the screw holes at the bottom of the
standalone base adapter (3 each for 1/4" and 3/8” mounting screws) to
mount the IP controller on a tripod, multi-mount bar, etc.
Turn the standalone base adapter so the side with the thicker center is
facing the IP controllers power switch and secure it in place using hex head
bolts (M3, x4)
When using the screw holes for tripod mounting, make sure the length of the mounting screws does not exceed
10 mm (0.39 in.).
Connecting the Cables
Use the following diagram as a reference to connect the IP camera controller to the main capture camera and other
devices. It shows a connection example where the control PC and FTP server are connected using a PoE hub. For details
about the main capture camera, wide view camera and eyepiece camera, refer to their respective instruction manuals. If
using a CR-S700R Robotic Camera Head, refer to the CR-S700R instruction manual for details.
Screw holes for
tripod mounting
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon CR-G100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon CR-G100 in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info