709432
14
Zoom out
Zoom in
Previous page
1/37
Next page
4 Configuration Overview of the Verification Process using the Web Setup Tool
14
4 Configuration
This chapter explains how to use the web setup tool to complete the initial configuration and verify the operation of the
system. If you are not using a camera head, you can skip the procedures relevant to that system.
Overview of the Verification Process using the Web Setup Tool
1. Turn on the camera head or the IP controller (A 13).
2. Configure the network and network passwords.
3. Check and register the connected devices.
4. Only when using a camera head Perform the camera heads homing procedure.
5. Only when using a camera head for the first time/after the lens is replaced Select the lens used.
6. Only when using a camera head Check the motion range for pan/tilt/roll/zoom operations and
adjust the motion range values as necessary.
7. Set the shooting settings on the main capture camera and check the shutter operation.
8. Only when using a camera head Perform the camera heads homing procedure again.
9. Set the system to READY status to set it in standby mode for the main shooting session.
10. Log out from the system.
11. Turn off the camera head or IP controller (A 13).
Starting Up the Web Setup Tool
For details about the web setup tools system requirements (compatible OS, web browsers, etc.), visit your local Canon
website.
Disable automatic proxy settings.
Access the OSs network settings on the control computer and disable in advance the automatic detection
of proxy settings on the control PC. For example, on a Windows 10 system:
Go to Start Menu > [Settings] > [Network & Internet] > [Proxy] and toggle the [Automatically detect
settings] option to [Off].
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon CR-G100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon CR-G100 in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info