Manual Cadel TESIS 16-23 AIRTIGHT (page 25 of 40) (English)

815163

Zoom out

Zoom in

1/40

IDROSTUFE

• Before any attempts to reignite the product, thoroughly clean the brazier and its air passage holes from build-up and any

unburnt pellets; reposition the brazier in its housing, removing any residue from its support base. If the product repeatedly fails

to ignite, we recommend that you stop using it immediately and contact a qualified technician to check product and chimney

operation.

12 FUEL

12.1 FUEL

• Use top-quality pellets because they have influence in the calorific value and in ash remains.

• Pellets features are: dimension Ø6-7mm (D06 Class), maximum lenght 40 mm, calorific value 5kWh/kg, humidity ≤ 10%, ash

remains ≤ 0,7%, they must be correctly pressed and not much mealy, without sizing agents, resins and other additives (class

A1 pellets according to ISO 17225-2 (type ENplus-A1) are recommended).

• Not adequate pellets cause a bad combustion, a frequent burning pot obstruction and exhaust conduits obstruction. Further it

decreases the calorific value, soils the glass and increases consumptions and ash and unburnt granules quantity.

Humid pellets cause a bad combustion and running, so please assure you that they are stored in dry places and

far at least one meter from the stove and/or any other source of heat.

• It is advisable to try different type of pellets available on the market and to choose that which gives the best performance.

• The use of bad quality pellets can damage the stove so that the warranty and manufacturer liability fall.

• Pellets of variable quality and size are available on the market: the smaller the pellet, the greater the fuel supply, resulting in

poor combustion

Depending on the type of pellets it could be necessary a parameters adjustment, please contact an Authorized

Assistance Service.

12.2 PELLET SUPPLY

Fig. 12 - Wrong opening of the pellets bag Fig. 13 - Right opening of the pellets bag

It is necessary to avoid to fill the hopper with the pellet when the stove is running.

• Do not get the bag of pellet in contact with hot stove surfaces.

• Do not empty the hopper with remaining fuels (unburnt pellet) from the burning pot coming from ignition waster.

13 LOADING PELLETS

13.1 LOADING PELLETS

Fuel is loaded from the top of the stove, lifting the door. Pour the pellets into the hopper.

To facilitate the procedure, do it two steps:

Pour half of the contents into the hopper and wait for the pellets to settle at the bottom.

Complete the operation by pouring in the second half.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cadel TESIS 16-23 AIRTIGHT in the language / languages: English as an attachment in your email.

The manual is 2.27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cadel TESIS 16-23 AIRTIGHT Manual

Product: