Manual Cadel TESIS 16-23 AIRTIGHT (page 23 of 40) (English)

815163

Zoom out

Zoom in

1/40

IDROSTUFE

This is absolutely normal, as the structure is built in laminated steel, and is not to be considered a defect.

It is extremely important to make sure not to overheat the stove right away, but rather heat it gradually to the desired tempera-

ture, initially using low power.

This will prevent damage to the ceramic plates or coil, welding, and steel structure.

DO NOT IMMEDIATELY EXPECT HEATING EFFICIENCY!!!

ATTENTION!

If smoke flows into the room from the appliance or the flue during operation or initial ignition, switch off the

device, air out the room, and immediately contact the installation/customer service technician.

10.3 POWER OUTPUT

Once the start-up stage is complete the control panel will display ON with a fixed flame at level 3. The subsequent flame modula-

tion at lower or higher powers is managed autonomously and upon reaching the temperatures set in the “System configuration”.

Fig. 9 - big Flame Fig. 10 - small Flame

10.4 ADJUSTMENTS MENU

To access the adjustments menu act as follows:

• Press the + - keys

• Scroll with the <> arrows and select “Set Room T” or “Set Water T” or “Exchanger Speed”

• Press “menu” to access the selected option.

• Modify with the + - keys.

• Press “menu” to confirm and “esc” to exit.

Fig. 11 - Display

Note: The full stop to the right of the ambient temperature shown in the control panel display (upper right) indicates the half

degree (e.g. 23.° means 23.5°C).

Air V. Speed - this function allows selecting the desired speed for the ambient fans from 1 to 5 or A. A means automatic, ventila-

tion depends on power, recommended setting (seeFig. 11).

10.5 NORMAL SHUTDOWN ON THE PANEL: OFF WITH FLASHING FLAME

If the shutdown key is pressed or if there is an alarm signal, the boiler goes into the thermal shutdown phase which entails the

automatic execution of the following stages:

• It stops pellets loading

• The room fan (if provided) maintains the set speed until the smoke T reaches 100°C, then it automatically sets itself at the

minimum speed until it reaches the shutdown temperature

• The smoke fan sets itself at maximum speed and maintains it for a fixed time of 10 minutes, at the end of which if the smoke

T has fallen below the shutdown threshold it switches off permanently, otherwise it sets itself at the minimum speed until it

reaches such threshold before switching off.

• If the boiler was shutdown regularly but, due to thermal inertia the smoke temperature exceeds the threshold again, the

shutdown stage restarts at the minimum speed until the temperature goes down.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cadel TESIS 16-23 AIRTIGHT in the language / languages: English as an attachment in your email.

The manual is 2.27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cadel TESIS 16-23 AIRTIGHT Manual

Product: