772377
12
Zoom out
Zoom in
Previous page
1/84
Next page
CHILD BIKE SEAT
ENG
12
Attaching the Frame Mounting System to Your Bicycle
1. Remove the Mounting Plate [Figure 15a] from the Mounting Block [Figure 15b] by using the
provided Hex Wrench to remove the 4 screws and lock washers [Figure 15c].
2. Open the Frame Protector on the Mounting Block wide [Figure 16], and wrap it around the Seat
Tube of your bicycle, with the Mounting Block facing forward, and orient with the Mounting Rail
holes facing upwards [Figure 17].
NOTE: If there are cables along this part of the frame, the Frame Protector should go
underneath them so that there is nothing between it and the bicycle frame [Figure 17a].
3. Re-attach the Mounting Plate to the Mounting Block using the 4 screws with lock washers.
Tighten the 4 screws in a crisscross pattern and in stages [Figure 18] to a torque value of 8NM.
Check the security of the fasteners regularly. Ensure that the space between the Mounting Plate
and Mounting Block is even on all sides.
NOTE: If there are cables along this part of the frame, they should be positioned so that they run
along the central channel between the Frame Protector and Mounting Plate [Figure 18a].
Figure 15 Figure 16
Figure 17 Figure 18
C B
A
A
A
8NM
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burley Dash FM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burley Dash FM in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 6.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info