772377
14
Zoom out
Zoom in
Previous page
1/84
Next page
CHILD BIKE SEAT
ENG
14
Checking the Position of the Bicycle Seat
1. Vertical Position:
The Base Plate on the bottom of the Bicycle Seat should be far enough away from the tire of the
bicycle that they do not make contact when the Bicycle Seat is fully loaded.
- The maximum distance between the Base Plate and the bicycle tire, when the Bicycle Seat is
unloaded, is 3.93 in (10 cm) [Figure 21a].
If the Base Plate is too far from, or too close to, the bicycle wheel:
- Use the provided Hex Wrench to loosen the 4 screws connecting the Mounting Plate to the
Mounting Block.
- Adjust the position of the Mounting Block on the Seat Tube until the Vertical Position of the
Bicycle Seat is appropriate.
- Re-tighten the 4 screws using the provided Hex Wrench, per the instructions on Page 12.
2. Horizontal Position:
The Bicycle Seat has a Center of Gravity Indicator, which is marked on the outer plastic shell
[Figure 21b].
The Center of Gravity Indicator MUST be positioned either:
- In front of the bicycle’s rear wheel axle; or
- No more than 3.93 in (10 cm) behind the bicycle’s rear wheel axle [Figure 21c].
If the Center of Gravity Indicator is more than 3.93 in (10 cm) behind the Bicycle’s rear wheel axle:
- Remove the Mounting Rails from the Mounting Block by following the instructions for
“Removing the Bicycle Seat from your Bicycle” on Page 21.
- Detach the Mounting Rails from the Bicycle Seat by following the instructions for “Removing the
Mounting Rails from your Bicycle Seat” on Page 21.
- Adjust the position (1, 2, or 3) that the Mounting Rails is aligned with on the underside of the
Bicycle Seat [Figure 22], so that the Horizontal position of the Bicycle Seat is appropriate.
- Follow step 3 and 4 in the “Attaching the Mounting Rails to your Bicycle Seat” section on Page 8.
NOTE: Special care must also be taken when positioning the child seat to ensure that the cyclist
does not touch the Bicycle Seat with his feet when cycling.
CAUTION: This step is extremely important for the safety of the child.
CAUTION: This step is extremely important for the safety of the child.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burley Dash FM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burley Dash FM in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 6.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info