772377
10
Zoom out
Zoom in
Previous page
1/84
Next page
CHILD BIKE SEAT
ENG
10
Attaching the Mounting Rails to Your Bicycle Seat
DASH X FM
1. Remove the Mounting Rails from the Mounting Block by depressing the front face of the
Mounting Block [Figure 8a] and simultaneously pull the Mounting Rails out of the Mounting
Block [Figure 8b].
NOTE: Pull both Mounting Rails from Mounting Block at the same time for smooth removal.
2. Remove the bolt connecting the Base Plate to the Bicycle Seat by rotating it counter-clockwise
using the included Hex Wrench [Figure 9].
3. Flip the Base Plate away from the Bicycle Seat and remove it from the slots on the underside of
the Bicycle Seat [Figure 10].
4. Pass the Mounting Rails through the 2 holes between the legs of the Bicycle Seat [Figure 11].
NOTE: The orientation of the Mounting Rails should be such that they are bending downwards
[Figure 11].
5. For initial setup, align the Mounting Rails with position #3 on the underside of the Bicycle Seat
[Figure 12].
NOTE: These 3 positions are for adjusting the horizontal position of the Bicycle Seat. See
“Checking the Position of the Bicycle Seat” (Page 14) for further details.
6. Insert the metal Base Plate [Figure 13a] into the slots on the underside of the Bicycle Seat
[Figure 13b], and flip it closed [Figure 13c].
7. Re-attach the bolt by rotating it clockwise [Figure 14a] to a torque value of 8NM If you do not
have a torque wrench, please visit a bicycle retailer to ensure proper installation.
CAUTION: This step is extremely important for the safety of the child.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burley Dash FM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burley Dash FM in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 6.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info