697437
18
Zoom out
Zoom in
Previous page
1/52
Next page
4
Installation
Logano GE615 - Subject to technical modifications.
18
4.5 Setting up the boiler block – (when
supplied as a pre-assembled block)
B Cut through the straps.
B Remove pallet.
Fig. 19 Boiler block on pallet
1 Securing straps
2 Pallet
Level the boiler block vertically and horizontally on the
base/silencing plinth. Use the boiler section foot wedges
provided for this purpose.
Once the boiler block is levelled, remove the transport
stay from the upper and lower hubs.
Fig. 20 Removing transport stay
1 Upper hub
2 Lower hub
3 Transport stay
4.6 Inserting the feed pipe (parts case)
On boilers with 9 – 11 sections the feed pipe is in 2 parts;
on boilers with 12 – 16 sections, it comes in 3 parts.
B Push the flat gasket over the feed pipe.
B Push the feed pipe from the front into the upper boiler
hub.
B Close off with dummy flange.
B Place the lug on the feed pipe connection endplate into
the recess on the upper boiler hub.
DANGER: Risk to life due to falling loads!
B Observe the transport information on the
data sheet (attached to boiler block) when
lifting the boiler block off the pallet.
The following pages describe the installation
of the feed pipe, sensor well and outer steam
tube. The installation steps are the same,
regardless of whether delivery is as a pre-
assembled block or in loose sections.
To ensure the discharge openings of the feed
pipe are at the correct angle, the lug on the
feed pipe connection endplate must be
placed in the recess on the upper boiler hub.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buderus Logano GE615 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buderus Logano GE615 in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buderus Logano GE615

Buderus Logano GE615 User Manual - German - 12 pages

Buderus Logano GE615 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info