Manual Brother XL-5030 (page 66 of 82) (English, Italian, Spanish)

631388

Zoom out

Zoom in

1/82

CONTENTS

KNOWING YOUR

SEWING MACHINE

STRAIGHT AND

ZIGZAG STITCHING

BUILT-IN STITCHES

BUTTONHOLE AND

BUTTON SEWING

USING ATTACHMENTS

AND APPLICATIONS

MAINTENANCE

INDEX

Darning

XL5030 XL5020 XL5010

Pattern Stitch Length

1 1 5 Straight Stitch Any

1. Place the darning plate on the needle plate as shown in fig. A.

1’. Lower the feed dogs by setting the drop feed lever to the up posi-

tion. (When the machine is equipped with a Drop Feed.)

2. Set the pattern selection dial to the Straight Stitch.

3. Place the portion to be darned under the presser foot together with

a fabric underlay for reinforcement.

4. Remove the presser foot and presser foot holder, then lower the

presser foot lifter.

5. Begin sewing alternating between gently drawing the work away

from you and pulling it toward you.

6. Repeat this motion until the portion to be darned is filled with par-

allel lines of stitching. (See fig. B.)

Zurcido

XL5030 XL5020 XL5010

Número de puntada

Largo de puntada

1 1 5 Puntada recta Cualquiera

1. Coloque la placa de zurcido en la placa de la aguja tal y como se

muestra en la fig. A.

1’. Baje los alimentadores colocando la palanca en la posición ha-

cia arriba. (cuando la máquina está equipada con alimentación

de bajada).

2. Ponga el selector de puntada en puntada recta.

3. Ponga el tejido a zurcir debajo del prensatelas con una pieza de

tela de refuerzo debajo.

4. Retire el prensatelas y su soporte y luego bájelo.

5. Empiece a coser empujando y tirando alternativamente del teji-

do.

6. Repita la operación hasta que el zurcido se haya completado

creando unas cuantas líneas de puntadas paralelas. (Ver fig. B.)

Rammendo

XL5030 XL5020 XL5010

Punto Lunghezza

1 1 5 Punto diritto Quella prescelta

1. Posizionare la placca da rammendo sulla placca dell’ago come illustra-

to nella fig. A.

1’. Abbassare il trasportatore spostando la leva abbassa-trasportatore verso

il basso. (se la macchina è equipaggiata con la leva abbassa-trasportato-

re)

2. Disporre il selettore dei punti sul punto diritto.

3. Applicare una tela di rinforzo sotto la parte da rammendare e disporre il

tutto sotto il piedino premistoffa.

4. Rimuovere il piedino premistoffa e il suo supporto e abbassare la leva

abbassa-trasportatore.

5. Iniziare a cucire spingendo e tirando leggermente il lavoro con movi-

mento alternato.

6. Ripetere questo movimento finché la parte da rammendare non è coper-

ta da una fitta serie di linee di punti paralleli. (Vedi fig. B.)

I'm a complete notice, and need your help.
I was using my sewing machine and the unit that holds the needle came off the main rod that moves up and down.. There seems to be a tiny alan screw, is that what holds it on the rod? Would need a tiny alan key..

Thank you for any help..
Kind regards
Helen Submitted on 10-10-2020 at 20:19
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-5030 in the language / languages: English, Italian, Spanish as an attachment in your email.

The manual is 1,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother XL-5030

Brother XL-5030 User Manual - German, Dutch, French - 85 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother XL-5030 Manual

Product: