Manual Brother XL-5030 (page 64 of 82) (English, Italian, Spanish)

631388

Zoom out

Zoom in

1/82

CONTENTS

KNOWING YOUR

SEWING MACHINE

STRAIGHT AND

ZIGZAG STITCHING

BUILT-IN STITCHES

BUTTONHOLE AND

BUTTON SEWING

USING ATTACHMENTS

AND APPLICATIONS

MAINTENANCE

INDEX

Zipper Inserting

XL5030 XL5020 XL5010

Pattern Stitch Length Foot

2 2 5 Straight Stitch 2-3 Zipper Foot

The zipper foot is used to sew various types of zippers and can easily

be positioned on the right or left side of the needle.

When sewing the right side of the zipper, attach the presser foot holder

to the left pin on the zipper foot. When sewing the left side of the

zipper, attach the presser foot holder to the right pin on the zipper foot.

(See fig. A.)

1. Set the pattern selection dial to the Straight Stitch. Set the stitch

length between “2” and “3”.

2. Lower the presser foot lever and attach the presser foot holder to

either the left or right pin on the zipper foot.

3. Fold the edge of the material 2 cm (3/4") and place the zipper un-

der the folded portion.

4. Lower the needle into the notch on either the left or right side of the

zipper foot.

5. Sew from the bottom of the zipper toward the top on both sides.

The needle should be positioned on the zipper side of the foot for

best results. (See fig. B.)

6. To sew the opposite side of the zipper, release

the foot by raising the lever located at the back of the presser foot,

move the zipper foot to the other side of the zipper, and continue

sewing using the other side notch.

1 Zipper foot

2 Right pin for sewing the left side of the zipper

3 Left pin for sewing the right side of the zipper

Check for correct needle setting.

The wrong setting can cause the needle to break.

Gathering

XL5030 XL5020 XL5010

Pattern Stitch Length

2, 3 2, 3 4, 5 Straight Stitch 4

1. Set the pattern selection dial to the Straight Stitch.

2. Loosen the tension of the upper thread (to about “2”) so that the

lower thread lies on the underside of the material.

3. Sew a single row or multiple rows of straight stitches.

4. Pull the lower thread(s) to gather the material.

I'm a complete notice, and need your help.
I was using my sewing machine and the unit that holds the needle came off the main rod that moves up and down.. There seems to be a tiny alan screw, is that what holds it on the rod? Would need a tiny alan key..

Thank you for any help..
Kind regards
Helen Submitted on 10-10-2020 at 20:19
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-5030 in the language / languages: English, Italian, Spanish as an attachment in your email.

The manual is 1,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother XL-5030

Brother XL-5030 User Manual - German, Dutch, French - 85 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother XL-5030 Manual

Product: