631390

Brother XL-5012 Manual

39
Zoom out
Zoom in
Previous page
1/83
Next page
31
CONTENTS
KNOWING YOUR
SEWING MACHINE
STRAIGHT AND
ZIGZAG STITCHING
BUILT-IN STITCHES
BUTTONHOLE AND
BUTTON SEWING
USING ATTACHMENTS
AND APPLICATIONS
MAINTENANCE
INDEX
Twin-Needle Sewing
Your sewing machine is designed for twin-needle sewing, which al-
lows you to sew using two upper threads. You can use the same color
or two different colors of thread for decorative stitches.
Inserting The Twin Needle
Insert the twin needle in the same way that a single needle is inserted.
(Refer to page 7.) The flat side of the needle should be toward the back
and the rounded side should be toward you.
Setting The Extra Spool Pin
Place the extra vertical spool pin in the hole found on the top right-
hand side of the machine. Place the second spool of thread on this pin
as shown in fig. A.
1 Extra spool pin
Twin-Needle Threading
Each needle should be threaded separately.
1. Threading the Right Needle
Follow the same instructions for single-needle threading. See page
25 for more details.
2. Threading the Left Needle
Thread the left needle in the same way as the right needle was
threaded, but do not pass the thread through the thread guide above
the needle before passing it through the eye of the left needle as
shown in fig. B.
2 Right needle thread passes through the guide.
3 Left needle thread passes in front of the guide.
WARNING:
By using a twin needle, use only four patterns: the straight stitch (center
needle position), the triple stretch stitch (center needle position), the
most narrow zigzag stitch and most narrow triple zigzag stretch stitch.
Otherwise the needles may hit the needle plate causing the needle to
break.
3
2
1
Costura con aguja doble
Su máquina de coser ha sido concebida para poder utilizar una aguja
doble y permitir la costura con dos hilos superiores. Puede usar el mismo
color de hilo o dos hilos de colores distintos para puntadas decorativas.
Para introducir la aguja doble
Introdúzcala de la misma manera que una aguja simple (ver página
7). La parte plana de la aguja debe apuntar hacia la parte trasera
mientras que la parte inclinada debe apuntar hacia usted.
Para instalar el porta carretes extra
Coloque el porta carretes vertical extra en el orificio previsto arriba
de la máquina, en la parte derecha. Coloque el segundo carrete de
hilo en el eje tal como indica la fig. A.
1 Porta carretes extra
Enhebrado de la aguja doble
Cada una de las agujas debe ser enhebrada por separado.
1. Enhebrado de la aguja derecha.
Siga las mismas instrucciones que para el enhebrado de una
sola aguja. Consulte la página 26 para obtener más información.
2. Enhebrado de la aguja izquierda.
Enhebre la aguja izquierda de la misma manera que la aguja
derecha. Sin embargo, no hay que pasar el hilo por la guía que
se sitúa arriba de la aguja. Conviene pasarlo directamente por el
ojo de la aguja izquierda, tal como se muestra en la fig. B.
2 El hilo de la aguja derecha pasa por la guía
3 El hilo de la aguja izquierda pasa por delante de la guía.
ADVERTENCIA:
Cuando utilice una aguja doble, use únicamente cuatro punta-
das: la puntada recta (posición central de la aguja), la puntada
triple elástica (posición central de la aguja), la puntada zigzag
más estrecha y la puntada triple zigzag elástica más estrecha.
De lo contrario, las agujas pueden chocar con la placa de agu-
jas y romperse.
Cucitura con ago gemello
Su questa macchina da cucire è possibile montare un ago gemello, il che
consente di cucire contemporaneamente con due fili d’ago per eseguire punti
decorativi ad uno o due colori.
Inserimento dell’ago gemello
Per inserire l’ago gemello, procedere come per l’inserimento dell’ago sin-
golo. (Vedere a pagina 7.) L’ago va posizionato con la parte piatta rivolta
indietro e la parte arrotondata rivolta verso se stessi.
Applicazione del porta-rocchetto ausiliario
Inserire il porta-rocchetto ausiliario nell’apposito foro situato in alto a de-
stra sulla macchina e collocarvi il secondo rocchetto di filo come mostrato
in fig. A.
1 Porta-rocchetto ausiliario
Infilatura dell’ago gemello
Infilare ogni ago separatamente.
1. Infilatura dell’ago destro
Seguire le stesse istruzioni relative all’infilatura dell’ago singolo. Vede-
re a pagina 26 per istruzioni più dettagliate.
2. Infilatura dell’ago sinistro
Infilare l’ago sinistro nello stesso modo dell’ago destro, ma senza far
passare il filo attraverso il guidafilo sopra l’ago prima di averlo infilato
nella cruna dell’ago sinistro come mostrato in fig. B.
2 Il filo dell’ago destro passa attraverso questa guida.
3 Il filo dell’ago sinistro passa davanti a questa guida.
AVVERTENZA:
Utilizzare l'ago gemello soltanto per: punto diritto (ago al centro), pun-
to stretch triplo (ago al centro), lo zig-zag più stretto e lo punto zigzag
stretch triplo più stretto. In caso contrario, gli aghi possono colpire la
placca dell’ago e rompersi.
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XL-5012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-5012 in the language / languages: English, Italian, Spanish as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info