631390
37
Zoom out
Zoom in
Previous page
1/83
Next page
29
CONTENTS
KNOWING YOUR
SEWING MACHINE
STRAIGHT AND
ZIGZAG STITCHING
BUILT-IN STITCHES
BUTTONHOLE AND
BUTTON SEWING
USING ATTACHMENTS
AND APPLICATIONS
MAINTENANCE
INDEX
Quick Thread-setting System
FAST START BOBBIN (when the machine
is equipped with a quick thread-setting
system)
This new system allows you to start sewing immediately after inserting
the bobbin without drawing up the lower thread. You can, however,
pull up the lower thread as explained on page 34 if you wish.
Turn power switch to “O”.
1. Hold the end of the bobbin thread and insert the bobbin case into
the shuttle.
1 Bobbin case
2 Shuttle
2. Close the shuttle cover while pulling the thread through the slit in
the cover.
3 Shuttle cover
4 Slit
3. Slide the thread down to the bottom of the slit, then pull it up and
cut it on the cutter to complete the lower threading.
4. Pull out about 15 cm (6") of the upper thread as usual, then pull it
between the toes of the presser foot and straight toward the back of
the machine.
5. Start sewing as usual. (It is not necessary to draw up the bobbin
thread.) (Refer to page 30)
1
2
3
4
Sistema rápido de colocación del hilo
BOBINA DE INICIO RÁPIDO (cuando
la máquina está equipada con un
sistema rápido de colocación del hilo)
Este nuevo sistema permite comenzar a coser de forma inmediata
después de insertar una bobina sin necesidad de sacar el hilo de la
canilla. No obstante, también puede sacar el hilo de la canilla tal
como se explica en la página 34.
Desenchufar la máquina, interruptor principale a “O”.
1. Sujete el extremo del hilo de la bobina e inserte el portabobina
en la lanzadera.
1 Portabobina
2 Lanzadera
2. Cierre la tapa de la lanzadera a la vez que tira del hilo que pasa
a través de la ranura de la tapa.
3 Tapa de la lanzadera
4 Ranura
3. Deslice el hilo hacia abajo hasta el fondo de la ranura y luego tire
del hilo hacia arriba y córtelo para completar la canilla.
4. Tire aproximadamente 15 cm (6") del hilo superior de la forma
habitual, luego tire de él entre los talones del prensatelas en di-
rección a la parte trasera de la máquina.
5. Comience a coser de la forma habitual. (No es necesario sacar el
hilo de la bobina) (consulte la página 30).
Sistema di infilatura rapido
SPOLINA AD AVVIAMENTO RAPIDO
(se la macchina è equipaggiata con un
sistema rapido di posizionamento del filo)
Questo nuovo sistema consente di iniziare a cucire immediatamente dopo
l’inserimento della spoletta senza raccogliere il filo inferiore. Se lo si desi-
dera, è possibile tuttavia tirare il filo inferiore come spiegato a pagina 35.
Mettere l’interruttore principale su “O”.
1. Reggere l’estremità del filo della spolina ed inserire la capsula della
spoletta nel crochet.
1 Capsula della spoletta
2 Crochet
2. Chiudere lo sportello del crochet tirando al tempo stesso il filo attraver-
so la scanalatura nello sportello.
3 Sportello crochet
4 Scanalatura
3. Far scorrere il filo in basso nella scanalatura, quindi tirarlo verso l’alto e
tagliarlo sul tagliafilo per completare l’infilatura inferiore.
4. Tirare circa 15 cm di filo superiore nel solito modo, quindi tirarlo attra-
verso le punte del piedino premistoffa in linea retta verso il retro della
macchina.
5. Iniziare a cucire come al solito (non è necessario raccogliere il filo della
spoletta). (vedere pagina 30)
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XL-5012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-5012 in the language / languages: English, Italian, Spanish as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info