Manual Brother XL-5012 (page 38 of 83) (English, Italian, Spanish)

631390

Zoom out

Zoom in

1/83

CONTENTS

KNOWING YOUR

SEWING MACHINE

STRAIGHT AND

ZIGZAG STITCHING

BUILT-IN STITCHES

BUTTONHOLE AND

BUTTON SEWING

USING ATTACHMENTS

AND APPLICATIONS

MAINTENANCE

INDEX

Drawing Up Lower Thread

1. Raise the presser foot and the needle to their highest positions.

2. With your left hand, hold the end of the upper thread. With your

right hand, turn the balance wheel toward you (counterclockwise)

until the needle moves down and back up again to its highest posi-

tion.

3. The upper thread should have caught the lower thread in a loop.

Pull the upper thread toward you and the lower thread will come

up from the bobbin in a large loop.

4. Pull out about 15 cm (6") of both threads and place them toward

the back of the machine straight behind the presser foot. The upper

thread should pass between the toes of the presser foot.

1 Upper thread

2 Lower thread loop

3 Lower thread

Para sacar el hilo de la canilla

1. Levante el prensatelas y la aguja a sus posiciones más elevadas.

2. Con la mano izquierda, sujete el extremo del hilo superior. Con la

mano derecha, gire la ruedecilla hacia usted (en el sentido con-

trario al de las manecillas de un reloj) hasta que la aguja vaya

hacia abajo y suba a su posición más alta.

3. El hilo superior debe haber enganchado el hilo inferior en un lan-

zo. Tire del hilo superior hacia usted y el hilo inferior saldrá de la

canilla en un amplio enlace.

4. Tire unos 15 cm (6") de ambos hilos y colóquelos hacia la parte

posterior de la máquina, justo detrás del prensatelas. El hilo su-

perior debe pasar entre los salientes del prensatelas.

1 Hilo superior

2 Enlace del hilo inferior

3 Hilo inferior

Raccolta del filo inferiore

1. Sollevare il piedino premistoffa e l’ago fino alla posizione più alta.

2. Reggere l’estremità del filo superiore con la mano sinistra. Con la mano

destra girare il volantino verso se stessi (in senso antiorario) finché l’ago

non scende e risale fino alla posizione più alta.

3. In questo modo il filo superiore afferrerà il filo inferiore formando un

cappio. Tirare il filo superiore verso se stessi in modo che il filo inferio-

re fuoriesca dalla spoletta in un ampio cappio.

4. Tirare circa 15 cm dei due fili e orientarli verso il retro della macchina

direttamente dietro il piedino premistoffa. Il filo superiore deve passare

attraverso le punte del piedino premistoffa.

1 Filo superiore

2 Cappio del filo inferiore

3 Filo inferiore

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-5012 in the language / languages: English, Italian, Spanish as an attachment in your email.

The manual is 1,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother XL-5012 Manual

Product: