Manual Brother Super Galaxie3000 (page 305 of 319) (English)

555755

305

Zoom out

Zoom in

1/319

9-10 Troubleshooting

1 —

2 —

3 —

4 —

5 —

6 —

7 —

8 —

9 —

CONTENTS

Index

CAUTION

Be sure to rethread the machine. If you

press the “Start/Stop” button without

rethreading the machine, the thread

tension may be wrong or the needle may

break and cause injury.

ERROR MESSAGES

If the machine is not properly set and the “Start/Stop” button or the “Reverse/Reinforcement Stitch”

button is pressed, or if the operation procedure is incorrect, the machine does not start. An alarm

sounds and an error message is displayed on the LCD. If an error message displays, follow the

instructions in the message.

Below is an explanation of 49 error messages. Refer to these when necessary (if you press

or do the operation correctly while the error message is displayed, the message disappears).

This message is dis-

played when the motor

locks due to tangled

thread or for other

reasons relate to thread

delivery.

This message is dis-

played when the presser

foot is raised and the

“Start/Stop” button,

“Reverse/Reinforcement

Stitch” button, or

“Thread Cutter” button

pushed.

This message is dis-

played when the upper

thread is broken or not

threaded correctly, and

the “Start/Stop” button

or the “Reverse/

Reinforcement Stitch”

button is pressed.

This message is dis-

played when the

is touched

without an embroidery

card inserted.

This message is dis-

played when the

embroidery unit

initialization is started

with the presser foot

lever down.

This message is dis-

played if the

touched when an

unusable embroidery

card is inserted.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother Super Galaxie3000 in the language / languages: English as an attachment in your email.

The manual is 7,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother Super Galaxie3000 Manual

Product: