555755

Brother Super Galaxie3000 Manual

304
Zoom out
Zoom in
Previous page
1/319
Next page
Troubleshooting 9-9
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
?
!
9 —
CONTENTS
Index
1 There is no pattern selected.
2 “Start/Stop” button was not pushed.
3 Main power switch is not turned on.
4 Presser foot is not lowered.
5 “Start/Stop” button was pushed with the
foot controller attached.
6 Using the foot controller for embroi-
dery.
7 Speed control lever is set to control the
zigzag stitch width.
1 There is no pattern selected.
2 Main power switch is not turned on.
3 Embroidery unit is not attached cor-
rectly.
4 Embroidery frame was attached before
the unit was initialized.
1 LCD contrast is not properly adjusted.
Problem Cause
PageSolution
Machine
does not
operate
Select a pattern.
Push the “Start/Stop” button.
Turn on the main power switch.
Lower the presser foot.
Remove the foot controller, or use
the foot controller to operate the
machine.
Remove the foot controller and use
the “Start/Stop” button to operate
the machine.
Use the foot controller instead of
the “Start/Stop” button to operate
the machine.
Select a pattern.
Turn on the main power switch.
Reattach the embroidery unit cor-
rectly.
Perform the initialization process
correctly.
Adjust the LCD contrast.
Embroidery
unit does
not operate
LCD
display is
difficult to
see
3-9, 4-1
5-8, 6-2
1-3
1-12
1-4
1-7
1-7
1-7
5-8, 6-2
1-12
5-5
5-5
1-16,
8-1
CAUTION
• This machine is equipped with a thread detection device. If the “Start/Stop” button is pushed
before the upper threading is done, the machine will not operate properly. Also, depending
on the pattern selected, the machine may feed the fabric even if the needle is raised. This is
due to the needle bar release mechanism. At these times, the machine will make a sound
different from that made during normal sewing. This is not the sign of a malfunction.
• If the power is disconnected during sewing:
- Turn off the main power switch and unplug the machine.
- If you restart the machine, follow the instructions for operating the machine correctly.
… 304 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Super Galaxie3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Super Galaxie3000 in the language / languages: English as an attachment in your email.

The manual is 7,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info