Manual Brother Super Galaxie3000 (page 307 of 319) (English)

555755

307

Zoom out

Zoom in

1/319

9-12 Troubleshooting

1 —

2 —

3 —

4 —

5 —

6 —

7 —

8 —

9 —

CONTENTS

Index

17.

This message is dis-

played when the

embroidery unit is

attached and the power

is turned on with the

needle in the down

position.

18.

This message is dis-

played when the

buttonhole lever is up, a

buttonhole stitch is

selected, and the “Start/

Stop” button or “Re-

verse/Reinforcement

Stitch” button is pushed.

19.

This message is dis-

played when there are

too many characters

and the curved charac-

ter configuration is

impossible.

20.

This message is displayed

when the machine is in

embroidery mode and the

combined character

pattern is too large for the

embroidery frame. You can

rotate the pattern 90

degrees and continue

combining characters.

21.

This message is dis-

played when there is no

stitch or embroidery

pattern selected and the

“Start/Stop” button, the

“Reverse/Reinforcement

Stitch” button, or

is pressed.

22.

This message is dis-

played when the

machine is in embroi-

dery mode, and the

character pattern

combination is too large

to fit in the embroidery

frame.

23.

This message is dis-

played when the

machine is in embroi-

dery mode and the

medium frame is

attached, and the

selected pattern does

not fit in the medium

frame.

24.

This message is dis-

played when the

machine is in embroi-

dery mode and the

small frame is attached,

and the selected pattern

does not fit in the small

frame.

25.

This message is dis-

played when the

machine is in embroi-

dery mode and the

embroidery unit tries to

initialize while the

embroidery frame is

attached.

26.

This message is dis-

played when the

machine is ready to sew

an embroidery pattern,

and the “Start/Stop”

button is pushed while

the embroidery frame is

not attached.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother Super Galaxie3000 in the language / languages: English as an attachment in your email.

The manual is 7,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother Super Galaxie3000 Manual

Product: