451267
88
Zoom out
Zoom in
Previous page
1/152
Next page
Chapter 11
11 - 3
No cartridge The toner cartridge is not installed
properly.
Reinstall the toner cartridge.
No Paper Fed The machine is out of paper or paper is
not properly loaded in the paper tray.
Refill the paper in the paper tray, and then press Start.
OR
Remove the paper and load it again and then press
Start.
No Response/Busy The number you dialled does not
answer or is busy.
Verify the number and try again.
Not Registered You tried to access a One-Touch or
Speed Dial number that is not
programmed.
Set up the One-Touch or Speed Dial number.
(See Storing One-Touch numbers on page 5-1 and
Storing Speed-Dial numbers on page 5-2.)
Out of Memory The machine’s memory is full. (Fax sending or copy operation in progress)
Press Start to send or copy the scanned pages.
OR
Press Stop/Exit and wait until the other operations in
progress have finished and then try again.
OR
Clear the faxes from the memory. (See Out of Memory
message on page 8-8.)
(Printing operation in process)
Reduce print resolution. (See Advanced tab in the
Software User’s Guide on the CD-ROM.)
OR
Clear the faxes from the memory. (See Out of Memory
message on page 8-8.)
Paper Jam Inside The paper is jammed inside the
machine.
(See Paper jams on page 11-7.)
Paper Jam Rear The paper is jammed in the back of the
machine.
(See Paper jams on page 11-7.)
Paper Jam Tray The paper is jammed in the paper tray
of the machine.
(See Paper jams on page 11-7.)
Scanner Locked The scanner glass’s sensor does not
move to the home position.
(For MFC-7420)
When you turn off the machine's power switch its
memory will be cleared. To check whether the
machine has faxes in its memory see Checking if the
machine has faxes in its memory on page 11-5. If there
are faxes you need to save them before following the
suggestions below. (See Transferring faxes to your PC
on page 11-5 or Forwarding faxes to another fax
machine on page 11-5.)
Turn off the machine's power switch and then on
again. If the error message continues, leave the
machine for several minutes and try it again.
(For MFC-7820N)
Turn off the machine's power switch and then on
again. If the error message continues leave the
machine for several minutes and then try it again. (The
machine can be turned off for up to 4 days without
losing faxes stored in the memory.)
ERROR MESSAGES
ERROR MESSAGE CAUSE ACTION
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother MFC-7820N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother MFC-7820N in the language / languages: English as an attachment in your email.

The manual is 4,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother MFC-7820N

Brother MFC-7820N User Manual - German - 159 pages

Brother MFC-7820N User Manual - Dutch - 151 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info