451267
87
Zoom out
Zoom in
Previous page
1/152
Next page
Troubleshooting and routine maintenance
11 - 2
11
Document Jam The document was not inserted or fed
properly, or the document scanned from
the ADF was too long.
See Document jams on page 11-6.
See Using the automatic document feeder (ADF) on
page 1-7.
Drum Error The drum unit needs to be cleaned. See Cleaning the corona wire on page 11-24.
Fail to Warm up The fuser unit is too cold. (For MFC-7420)
When you turn off the machine’s power switch its
memory will be cleared. (To check if faxes are in the
machine’s memory, see Checking if the machine has
faxes in its memory on page 11-5.) If there are faxes,
you need to save them before following the
suggestions below. (To save the faxes, see
Transferring faxes to your PC on page 11-5 or
Forwarding faxes to another fax machine on page
11-5.)
Then, turn off the machine’s power switch. Check the
machine’s environment. If it is in a location that is too
hot or too cold, try to cool or warm the room by turning
on the air conditioner or heater. Or, move the machine
to another location. Then, turn on the machine’s power
switch.
(For MFC-7820N)
Turn off the machine’s power switch, and check the
machine’s environment. If it is in a location that is too
hot or too cold, try to cool or warm the room by turning
on the air conditioner or heater. Or, change the
location. Then, turn on the machine’s power switch.
(The machine can be turned off for up to 4 days without
losing faxes stored in the memory.)
Unit is too Hot The fuser unit is too hot.
Machine too Hot The inside of the machine is too hot. Listen to the machine to check that the cooling fan is
spinning.
Make sure that the air vents are not covered up or
blocked.
If the fan is spinning and air vents are clear, you should
let the machine cool down for several minutes before
using it again.
If the fan is not spinning, you need to save the faxes
before you follow the suggestions below.
(For MFC-7420)
When you turn off the machine's power switch its
memory will be cleared. To check whether the
machine has faxes in its memory see Checking if the
machine has faxes in its memory on page 11-5. If there
are faxes you need to save them before following the
suggestions below. (See Transferring faxes to your PC
on page 11-5 or Forwarding faxes to another fax
machine on page 11-5.)
Turn off the machine's power switch and then on
again. If the error message continues, leave the
machine for several minutes and try it again.
(For MFC-7820N)
Turn off the machine's power switch and then on
again. If the error message continues leave the
machine for several minutes and then try it again. (The
machine can be turned off for up to 4 days without
losing faxes stored in the memory.)
ERROR MESSAGES
ERROR MESSAGE CAUSE ACTION
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother MFC-7820N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother MFC-7820N in the language / languages: English as an attachment in your email.

The manual is 4,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother MFC-7820N

Brother MFC-7820N User Manual - German - 159 pages

Brother MFC-7820N User Manual - Dutch - 151 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info