555743
39
Zoom out
Zoom in
Previous page
1/81
Next page
29
CONTENTS INDEXMAINTENANCE
KNOWING YOUR
SEWING MACHINE
STRAIGHT AND
ZIGZAG STITCHING
BUILT-IN STITCHES
BUTTONHOLE AND
BUTTON SEWING
USING ATTACHMENTS
AND APPLICATIONS
Removing the Fabric from the Machine
1. Stop the machine.
2. Turn the balance wheel toward you (counterclockwise) to bring the
needle and thread take-up lever to their highest position.
3. Lift the presser foot and pull the fabric out gently to the left side.
4. Cut both threads using the thread cutter located on the back of the
presser foot bar.
1 Thread cutter
5. To prepare the machine for the next seam, pull about 10 cm (4") of
thread through the toes of the presser foot toward the back of the
machine.
Sewing on Very Thin Fabric
An underlay of thin paper will act as a stablizer and will help to elimi-
nate skipped stitches and fabric puckering when sewing on very thin
fabric.
1
Retirer le tissu de la machine
1. Arrêter la machine.
2. Tourner le volant vers soi (dans le sens contraire des aiguilles dune
montre) pour remonter complètement laiguille et le levier rele-
veur de fil.
3. Remonter le pied et retirer le tissu en le tirant doucement vers la
gauche.
4. Couper les deux fils à laide du coupe-fils situé à larrière de laxe
du pied-de-biche.
1
Coupe-fils
5. Pour préparer la machine pour la couture suivante, faire passer
environ10 cm de fil entre les branches du pied-de-biche, vers lar-
rière de la machine.
Les tissus très légers
Utiliser une fine feuille de papier pour les stabiliser, ce qui éliminera
les points manqués et empêchera le tissu très fin de se froncer.
Para retirar el tejido de la máquina
1. Pare la máquina.
2. Gire la ruedecilla hacia usted (en el sentido contrario al de las
manecillas de un reloj) para levantar la aguja y la palanca tirahilos
a su posición más alta.
3. Levante el prensatelas y saque suavemente el tejido por la iz-
quierda.
4. Corte ambos hilos con el cortador que se encuentra detrás de la
barra del prensatelas.
1 Cortador de hilos
5. Con el fin de dejar la máquina preparada para la próxima costu-
ra, pase unos 10 cm (4") de hilo por los salientes del prensatelas
hacia la parte posterior de la máquina.
Cómo coser tela muy delgada
Un papel delgado debajo de la tela le permitirá estabilizarla y le ayu-
dará a evitar que se salten puntadas o que se produzcan fruncidos
al coser en tejidos muy finos.
Remoção do Tecido da Máquina
1. Pare a máquina.
2. Rode o volante em direção a você (sentido anti-horário) para trazer a
agulha e a alavanca de regulagem da linha até as suas posições mais
altas.
3. Levante o pé calcador e puxe o tecido gentilmente para a esquerda.
4. Corte ambas as linhas, usando o cortador de linha localizado na traseira
da barra do pé calcador.
1 Cortador de Linha
5. Para preparar a máquina para a próxima costura, puxe cerca de 10 cm
(4") de linha pelos dedos do pé calcador, em direção à traseira da má-
quina.
Costura em Tecidos Muito Finos
Um forro de papel fino atuará como um estabilizador e auxiliará a eliminar
saltos de pontos e enrugamentos de tecido quando se costura em materiais
muito finos.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother LS1317 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother LS1317 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info