555743

Brother LS1317 Manual

41
Zoom out
Zoom in
Previous page
1/81
Next page
31
CONTENTS INDEXMAINTENANCE
KNOWING YOUR
SEWING MACHINE
STRAIGHT AND
ZIGZAG STITCHING
BUILT-IN STITCHES
BUTTONHOLE AND
BUTTON SEWING
USING ATTACHMENTS
AND APPLICATIONS
Zigzag Stitching
STITCH LENGTH 1-4 (For the Satin Stitch, set at F.)
STITCH WIDTH 1-5 (For twin needle sewing, always use a
setting of less than 3.)
NEEDLE POSITION M, L, R (For twin needle sewing, always set
at M.)
PRESSER FOOT Zigzag
NEEDLE Single or Twin
Simple Zigzag Stitch
Set the stitch length between 1 and 4 for a simple zigzag stitch.
NOTE:
Zigzag stitching requires less upper thread tension than straight stitch-
ing.
1. With the stitch length set between 0 and 1, sew 5-6 straight stitches
for reinforcement.
2. Set the stitch width to your desired width and begin sewing.
3. Reset the stitch width to between 0 and 1 to reinforce the stitches
again before removing the work from the machine.
SATIN STITCH
When the stitch length is set in the F range and the stitch width is set
above 1, it produces a Satin Stitch (a close zigzag stitch). The Satin
Stitch can be used for making buttonholes and decorative stitches or
edging.
NOTE:
It is recommended that a test sample be made on a fabric scrap before
sewing on your project.
Point zigzag
Longueur de point 1-4 (pour le point bourdon, régler sur F.)
Largeur de point 1-5 (lorsque l’aiguille jumelée est utilisée,
toujours régler sur moins de 3.)
Position de l’aiguille M, L, R (lorsque l’aiguille jumelée est utili-
sée, toujours régler sur M.)
Pied-de-biche Zigzag
Aiguille Simple ou jumelée
Point zigzag simple
Régler la longueur de point entre 1 et 4 pour un point zigzag simple.
REMARQUE :
La tension du fil supérieur n’a pas besoin d’être aussi importante pour
la couture en zigzag que pour les points droits.
1. La longueur de point entre 0 et 1, faire 5-6 points droits de conso-
lidation.
2. Régler la largeur de point en fonction de la largeur souhaitée et
commencer à coudre.
3. Régler de nouveau la largeur de point entre 0 et 1 pour consolider
de nouveau les points avant de retirer l’ouvrage de la machine.
Point bourdon
Lorsque la longueur de point est dans la plage F et la largeur de point
sur un réglage supérieur à 1, on obtient un point bourdon (un point
zigzag serré). Le point bourdon peut être utilisé pour les boutonnières
et les points fantaisie ou pour les bords.
REMARQUE :
Il est conseillé de s’exercer sur une chute de tissu avant de commencer
l’ouvrage proprement dit.
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother LS1317 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother LS1317 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info