Manual Brother LS1217 (page 38 of 81) (English, French, Portuguese, Spanish)

555741

Zoom out

Zoom in

1/81

CONTENTS INDEXMAINTENANCE

KNOWING YOUR

SEWING MACHINE

STRAIGHT AND

ZIGZAG STITCHING

BUILT-IN STITCHES

BUTTONHOLE AND

BUTTON SEWING

USING ATTACHMENTS

AND APPLICATIONS

For sewing denim

When sewing more than two layers of denim, help feed the fabric by

carefully guiding it over the feed dogs with your hands. (Feeding will

be easier if the fabric is slightly stretched, or if the sewing machine is

stopped, the presser foot lever raised and a piece of folded fabric or

cardboard is placed under the back of the presser foot to raise it.)

If it is difficult for the sewing machine needle to enter four to six layers

of denim, turn the balance wheel a half a turn toward you so that the

needle is in the fabric before sewing.

1 Fabric

2 Folded fabric or cardboard

While sewing along a path like that shown by the arrows in the illus-

tration, the thread tension may decrease when the presser foot de-

scends from the thick seam. Therefore, be sure to keep the thread ten-

sion tight until the presser foot has completely moved off the seam.

Be sure that you are using the correct sized needle. (See page 23)

Le denim

Lors de la couture de deux épaisseurs de denim, aider l’entraînement

du tissu en le guidant des mains doucement sur les griffes d’entraîne-

ment. (L’entraînement se fera plus facilement si le tissu est légèrement

étiré ou si la machine à coudre est à l’arrêt, le levier du pied-de-biche

remonté et un morceau de tissu plié ou de carton placé sous la partie

arrière du pied-de-biche pour le rehausser.)

Si l’aiguille de la machine à coudre peine à piquer quatre à six épais-

seurs de denim, donner un demi-tour au volant, vers soi, pour que

l’aiguille se trouve dans le tissu avant de commencer à coudre.

Tissu

Tissu plié ou carton

Lorsque l’on coud le long d’une ligne telle celle indiquée par les flè-

ches de l’illustration, il se peut que la tension du fil s’amoindrisse lors-

que le pied-de-biche descend d’une couture épaisse. Par conséquent,

s’assurer que la tension du fil reste suffisante jusqu’à ce que le pied-

de-biche ne soit plus du tout sur la couture.

Veiller à utiliser le calibre correct d’aiguille. (Voir page 23)

Cómo coser tejano

Cuando se cosan más de dos capas de tejano, ayude a alimentar el

tejido guiándolo con cuidado con las manos por los alimentadores.

(Para facilitar la alimentación, estire ligeramente la tela, o detenga

la máquina, levante la palanca del prensatelas y coloque un trozo de

tela doblada o cartón bajo la parte posterior del prensatelas para

elevarlo.)

Si la aguja presenta dificultades a la hora de penetrar varias capas

de tejano, dé medio giro a la ruedecilla hacia usted de forma que la

aguja esté picada en el tejido antes de coser.

1 Tela

2 Tela plegada o cartón

Cuando se cose a lo largo de un trayecto como el indicado por las

flechas del dibujo, es posible que disminuya la tensión del hilo cuan-

do el prensatelas desciende de la costura gruesa. Por lo tanto, ase-

gúrese de mantener la tensión del hilo hasta que el prensatelas haya

salido por completo de la costura.

Asegúrese de utilizar la aguja con el tamaño adecuado (véase pági-

na 24).

Para costurar denim (sarja de Nimes)

Quando for costurar duas ou mais camadas de denim, ajude o tecido a avan-

çar, guiando-o cuidadosamente sobre os dentes impelentes com as suas mãos.

(O avanço será mais fácil, se o tecido for levemente esticado, ou se a máqui-

na de costura estiver parada, a alavanca do pé calcador estiver levantada e

uma peça de tecido ou papelão dobrado for colocada sob a traseira do pé

calcador para elevá-lo.)

Se a agulha da máquina de costura estiver difícil de passar por quatro a seis

camadas de denim, rode o volante meia volta em direção a você, de maneira

que a agulha esteja no tecido antes da costura.

1 Tecido

2 Tecido ou papelão dobrado

Enquanto costura ao longo de um trajeto como o mostrado pelas setas na

ilustração, a tensão da linha pode diminuir quando o pé calcador descer da

costura grossa. Portanto, certifique-se de manter a tensão da linha até que o

pé calcador mova-se completamente para fora da costura.

Certifique-se de estar usando a agulha de tamanho correto. (Veja a página

24)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother LS1217 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother LS1217 Manual

Product: