631286
28
Zoom out
Zoom in
Previous page
1/68
Next page
19
Costura con aguja doble (opción)
Su máquina de coser ha sido concebida para poder utilizar una aguja
doble y permitir la costura con dos hilos superiores. Puede usar el
mismo color de hilo o dos hilos de colores distintos para puntadas
decorativas. Las costuras con aguja doble dan muy buenos resultados
con las siguientes puntadas: la puntada recta (6-10) y la puntada
zigzag (2). Sin embargo, debe asegurarse de que los dos hilos usados
para enhebrar la aguja doble sean del mismo peso. Si los hilos son de
pesos distintos, las puntadas resultarán erróneas.
PARA INTRODUCIR LA AGUJA DOBLE.
Introdúzcala de la misma manera que una aguja simple (véase página
6). La parte plana de la aguja debe estar cara hacia atrás mientras
que la parte redonda está cara a usted.
PARA INSTALAR EL PORTA CARRETES EXTRA
Coloque el porta carretes vertical extra en el orificio previsto arriba
de la máquina, en la parte derecha. Coloque el segundo carrete de
hilo en el eje tal como indica la fig. A.
a Porta carretes extra
ENHEBRADO DE LA AGUJA DOBLE
Cada una de las agujas debe ser enhebrada por separado.
1. Enhebrado de la aguja derecha
Siga las mismas instrucciones que para el enhebrado de una sola
aguja (véase página 15 para mayores detalles al respecto).
2. Enhebrado de la aguja izquierda
Enhebre la aguja izquierda de la misma manera que la aguja
derecha. Sin embargo, no hay que pasar el hilo por la guía que se
sitúa arriba de la aguja. Conviene pasarlo directamente por el ojo
de la aguja izquierda, tal como ilustrado arriba en la fig. B.
b El hilo de la aguja derecha pasa por la guía.
c El hilo de la aguja izquierda pasa delante de la guía.
Шитье двойной иглой (опция)
Швейная машина поддерживает шитье двойной иглой, то есть
можно шить с использованием двух верхних нитей. Можно
использовать нити одинаковых или двух разных цветов для
выполнения декоративных строчек. Шитьё двойной иглой
подходит для следующих строчек: прямая строчка (6-10) и
строчка “Зигзаг” (2). Обе верхние нити, используемые для
заправки двойной иглы, должны иметь одинаковый номер
(толщину). В противном случае трудно обеспечить требуемое
качество строчки.
УСТАНОВКА ДВОЙНОЙ ИГЛЫ
Установите двойную иглу тем же способом, которым
устанавливалась одиночная игла. (Подробную информацию
см. на стр.6.) Плоская сторона иглы должна быть повернута к
задней стороне машины, а полукруглая – к Вам.
УСТАНОВКА ДОПОЛНИТЕЛЬНОГО СТЕРЖНЯ
КАТУШКИ
Вставьте дополнительный стержень для катушки в
предназначенное для него отверстие, расположенное сверху в
правой части машины. На этот стержень наденьте вторую
катушку с нитью, как показано на рис. A.
a Дополнительный стержень для установки катушки
ЗАПРАВКА ДВОЙНОЙ ИГЛЫ НИТЬЮ
Каждую нить следует заправлять в иглу по отдельности.
1. Заправка правой нити в иглу
Следуйте тем же инструкциям, что и для заправки нити в
одиночную иглу. Подробную информацию см. на стр. 15.
2. Заправка левой нити в иглу
Заправляйте левую нить в иглу так же, как и правую, но
при этом не надо пропускать нить через нитенаправитель
над иглой перед тем как продеть её в ушко левой иглы
(см рис. B).
a Нить правой иглы пропущена через нитенаправи-
тель.
b Нить левой иглы проходит перед нитенаправителем.
AB
1
2
3
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother LS-3125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother LS-3125 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info