631286

Brother LS-3125 Manual

27
Zoom out
Zoom in
Previous page
1/68
Next page
18
1
Twin-Needle Sewing (Option)
Your sewing machine is designed for twin-needle sewing which
allows you to sew using two upper threads. You can use the same
color or two different colors of thread for decorative stitches.
Twin-needle sewing works well with these stitches: the Straight
Stitch (6-10)-and the Zigzag Stitch (2). Be sure that the two upper
threads used for threading the twin needle have the same weight.
If the threads do not have the same weight, the stitching may not
be consistent.
INSERTING THE TWIN NEEDLE
Insert the twin needle in the same way that a single needle is
inserted. (Refer to page 6.) The flat side of the needle should face
toward the back and the rounded side should face toward you.
SETTING THE EXTRA SPOOL PIN
Place the extra vertical spool pin in the hole found on the top
right-hand side of the machine. Place the second spool of thread
on this pin as shown in fig. A.
a Extra spool pin
TWIN NEEDLE THREADING
Each needle should be threaded separately.
1. Threading the Right Needle
Follow the same instructions for single needle threading. See
page 15 for more details.
2. Threading the Left Needle
Thread the left needle in the same way as the right needle was
threaded, but do not pass the thread through the thread guide
above the needle before passing it through the eye of the left
needle as shown in fig. B.
b Right needle thread passes through this guide.
c Left needle thread passes in front of this guide.
Couture avec l’aiguille jumelée
(en option)
Cette machine à coudre a été conçue pour pouvoir être utilisée
avec une aiguille jumelée, permettant ainsi de coudre avec deux
fils supérieurs. Il est possible d’utiliser la même couleur de fil ou
deux fils de couleurs différentes pour obtenir des points fantaisie
décoratifs. Les coutures à l’aide d’une aiguille jumelée donnent
d’excellents résultats avec les points suivants: le point droit (6-10)
et le point zigzag (2). S’assurer que les deux fils supérieurs utilisés
avec l’aiguille jumelée sont de la même épaisseur. Dans le cas
contraire, les points ne seronts pas nécessairement égaux.
MISE EN PLACE DE L’AIGUILLE JUMELEE
Introduire l’aiguille comme pour une aiguille normale (veuillez
vous référer à la page 6). Le côté plat de l’aiguille doit être tourné
vers l’arrière et l’arrondi doit se situer face à l’utilisateur.
MISE EN PLACE DU PORTE-BOBINE SUPPLEMENTAIRE
Placer le porte-bobine vertical supplémentaire dans l’orifice qui
se trouve au-dessus de la machine, du côté droit. Placer la
seconde bobine de fil sur cet axe comme le montre la fig. A.
a Porte-bobine supplémentaire
ENFILAGE DE L’AIGUILLE JUMELEE
Chaque aiguille doit être enfilée séparément.
1. Enfilage de l’aiguille de droite
Suivre les mêmes instructions que pour l’enfilage d’une
aiguille normale. Voir page 15 pour de plus amples détails.
2. Enfilage de l’aiguille de gauche
Enfiler l’aiguille de gauche de la même manière que l’aiguille
de droite mais sans passer le fil par le guide-fils situé au-
dessus de l’aiguille. Passer directement le fil par le chas de
l’aiguille gauche, comme le montre la fig. B.
b Le fil de l’aiguille droite passe par le guide-fils.
c Le fil de l’aiguille gauche passe devant le guide-fils.
AB
2
3
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother LS-3125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother LS-3125 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info