718712
20
Zoom out
Zoom in
Previous page
1/72
Next page
18
KNOWING YOUR SEWING MACHINE
f
Raise the presser foot lever.
a Presser foot lever
g
Pass the end of the thread as illustrated bellow.
Note
If you incorrectly feed the thread you may cause
sewing problems.
a
Lightly hold the end of the upper thread.
a Upper thread
b
While holding the end of the upper thread, raise
the needle either by turning the handwheel
toward you (counterclockwise) so that the mark
on the wheel points up or by pressing
(needle position button) (for models equipped
with the needle position button) once or twice.
c
Pull on the upper thread to draw up the lower
thread.
d
Pull out about 10 cm (4 inches) of both threads
and pull them toward the back of the machine
under the presser foot.
For models equipped with the quick-set
bobbin
You can begin sewing immediately without drawing
up the bobbin thread. When sewing gathers or
darts, you can draw up the lower thread by hand so
that some thread will be left over. Before you draw
up the lower thread, put the bobbin back in.
a
Pass the thread along the slit in the direction of
the arrow, and leave it there without cutting it.
The bobbin cover should still be removed.
b
Draw up the lower thread as described in steps
1 to 4.
c
Replace the bobbin cover.
This section provides information on sewing machine
needles.
Be sure to observe the following precautions
concerning the handling of the needle. Failure to
observe these precautions is extremely dangerous.
Drawing up the lower thread
a Mark b Needle position button
a 5 cm (2 inches)
REPLACING THE NEEDLE
Needle precautions
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother KD40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother KD40 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother KD40

Brother KD40 User Manual - German - 72 pages

Brother KD40 User Manual - Dutch - 72 pages

Brother KD40 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info