718712
19
Zoom out
Zoom in
Previous page
1/72
Next page
17
1
j
Turn off the sewing machine.
k
Thread the needle from front to back and pull
out about 5 cm (2 inches) of thread.
Note
If the thread take-up lever is lowered, the upper
thread cannot be wrapped around the thread take-
up lever. Make sure you raise the presser foot lever
and the thread take-up lever before you feed the
upper thread.
If you incorrectly feed the thread you may cause
sewing problems.
Using the needle threader (for models
equipped with the needle threader)
a
Follow steps a through j of the procedure in
“Upper threading”.
b
Lower the presser foot lever.
c
While lowering the needle threader lever, hook
the thread onto the guide.
d
Fully lower the needle threader lever.
The hook passes through the eye of the
needle, and catch the thread.
a Hook
b Thread
e
Release the needle threader lever. Then pull the
loop of the thread.
a Loop of thread
CAUTION
Make sure you turn the power off while
threading the machine without using the needle
threader (for models equipped with the needle
threader). If you accidentally step on the foot
controller and the machine starts to sew, you
could be injured.
CAUTION
The needle threader can be used with a 75/11
through 100/16 home sewing machine needle.
However, the needle threader cannot be used
with a 65/9 home sewing machine needle.
When using special thread such as transparent
nylon thread or metallic thread, the needle
threader cannot be used.
Thread with a thickness of 130/120 or thicker
cannot be used with the needle threader.
The needle threader cannot be used with the
wing needle or the twin needle.
If the needle threader cannot be used, refer to
“Upper threading” (page 15).
a 5 cm (2 inches)
CAUTION
Be careful not to pull on the thread with force
or it may bend the needle.
If the thread does not pass through the eye of
the needle, start from step
c again.
a Needle holder
b Needle threader
lever
c Guide
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother KD40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother KD40 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother KD40

Brother KD40 User Manual - German - 72 pages

Brother KD40 User Manual - Dutch - 72 pages

Brother KD40 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info