718712
22
Zoom out
Zoom in
Previous page
1/72
Next page
20
KNOWING YOUR SEWING MACHINE
a
Raise the needle by turning the handwheel
toward you (counterclockwise) so that the mark
on the wheel points up. (With models equipped
with (needle position button), raise the
needle by pressing once or twice.)
b
Turn off the sewing machine.
c
Lower the presser foot lever.
d
Remove the needle by turning the needle clamp
screw counterclockwise.
a Disc-shaped screwdriver
b Needle clamp screw
Note
If the needle clamp screw is loosened too much,
the needle clamp (which holds the needle) may
fall off. Therefore, do not loosen the needle clamp
screw too much.
Do not apply strong force when loosening or
tightening the needle clamp screw, otherwise
certain parts of the sewing machine may be
damaged.
e
With the flat side of the needle toward the rear
of the machine, insert the needle until it touches
the needle stopper.
a Needle stopper
f
Tighten the needle clamp screw by turning it
clockwise.
Install the twin needle in the same way.
Replacing the needle
a Mark b Needle position button
CAUTION
Before replacing the needle, be sure to turn off
the sewing machine, otherwise injuries may
occur if the foot controller or the start/stop
button is accidentally pressed and the machine
starts sewing.
CAUTION
Before replacing the needle, place fabric or
paper under the presser foot to prevent the
needle from falling into the hole in the needle
plate.
a Presser foot lever
CAUTION
Be sure to insert the needle until it touches the
needle stopper and securely tighten the needle
clamp screw with the disc-shaped screwdriver,
otherwise the needle may break or damage may
result.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother KD40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother KD40 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother KD40

Brother KD40 User Manual - German - 72 pages

Brother KD40 User Manual - Dutch - 72 pages

Brother KD40 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info