718486
112
Zoom out
Zoom in
Previous page
1/162
Next page
Difficulties Cause Suggestions
The scanned image is missing or
has blank spaces when Auto is
selected as the document size.
Paper dust has accumulated on the
surface of the glass strips inside the
machine.
Clean the glass strips inside the
machine.
See Related Information: Clean the
Scanner and Rollers.
Calibration needs to be performed. Perform the calibration.
See Related Information: Calibrate
Your Brother Machine.
The scanned image is skewed. The Document Guide is not adjusted to
fit the width of the document.
Gently adjust the Document Guide to
fit the width of your document.
The Long Paper setting is selected. Select a setting other than Long
Paper.
The document was curled. Straighten the curled document and
scan again.
The embossed card was inserted with
the embossed side down.
Remove the embossed card and then
reinsert it, embossed side up, into the
Feeder Slot.
The document is not inserted straight. Insert the document straight.
The plastic card is scanned with the
short edge first.
Scan the plastic card with the long
edge first.
The Output Guide is open.
(DSmobile DS-740D/
DSmobile DS-940DW)
Close the Output Guide.
Scanning is too slow. The resolution is not appropriate for your
document.
Decrease the scanner resolution.
If a cable other than a Micro USB 3.0
cable is used, the scanning speed may
become slow.
Use Micro USB 3.0 cable.
The document was not fed. Your media is too thin or too thick. Make sure your media is acceptable
for the machine.
See Related Information: Acceptable
Documents.
Remote Setup is in progress. Cancel Remote Setup.
The document was curled. Straighten the curled document and
scan again.
The document is jammed. Your document is not acceptable for the
machine.
Make sure your document is
acceptable for the machine. See
Related Information: Acceptable
Documents.
The document was curled. Straighten the curled document and
scan again.
The Output Guide is open.
(DSmobile DS-740D/
DSmobile DS-940DW)
Close the Output Guide.
Confirm the paper weight is
appropriate for scanning with the
Output Guide.
See Related Information: Acceptable
Documents.
The scan quality is poor. Paper dust has accumulated on the
surface of the glass strips inside the
machine.
Clean the glass strips inside the
machine.
See Related Information: Clean the
Scanner and Rollers.
Calibration needs to be performed. Perform the calibration.
109
112


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother DS-740D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother DS-740D in the language / languages: English as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother DS-740D

Brother DS-740D User Manual - German - 171 pages

Brother DS-740D User Manual - Dutch - 169 pages

Brother DS-740D User Manual - French - 167 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info