718772
185
Zoom out
Zoom in
Previous page
1/212
Next page
TROUBLESHOOTING
183
Appendix
7
While Operating
The bobbin thread cannot be pulled up.
Needle is turned, bent or the point is dull. 48
Bobbin is set incorrectly. 40
Machine does not operate
All keys and buttons have been locked by .
48, 50
Nothing appears in the LCD.
Main power switch is not turned on.
22
The plug of the power cord is not inserted into an
electrical outlet.
22
The LCD screen does not look very clear.
The brightness of the screen is not adjusted. 28
Nothing happens, even if the LCD display is pressed
Adjust the screen.
177
The screen has been locked.
Press either of the following keys to unlock the
screen.
The LCD screen is fogged up.
Condensation has formed on the LCD screen.
After a while, the cloudiness will disappear.
Embroidery unit does not operate.
Embroidery unit is not attached correctly.
107
Embroidery frame was attached before the unit
was initialized.
107
Pointer of the embroidery foot “W+” with LED pointer
does not indicate the position correctly
With thick elastic fabric, the position will be
misaligned only at raised parts in the fabric.
131
With fabric having a very uneven surface, the
position is not correctly aligned.
The pointer indication should be used only as a
reference.
Symptom, Cause/solution
Reference
Symptom, Cause/solution
Reference
Machine does not operate.
“Start/Stop” button was not pressed.
13
Presser foot is not lowered.
13
“Start/Stop” button was pressed with the foot
controller attached.
58
The “Start/Stop” button was pressed while the
machine is set for the sewing speed controller to
control the zigzag stitch width.
27, 58
Needle breaks.
Needle is installed incorrectly. 48
Needle clamp screw is not tightened. 48
Needle is turned or bent. 48
Using improper needle or thread for the selected
fabric.
49
Wrong presser foot.
194
Upper thread tension is too tight. 62, 143
Fabric is pulled during sewing.
Spool cap is set incorrectly. 42
There are scratches around the opening in the
needle plate.
* There is a notch on the left side of the opening
in the needle plate. This is not a scratch.
*
There are scratches around the opening in the
presser foot.
*
There are scratches on the bobbin case. *
Needle is defective. 48
A bobbin designed specifically for this machine is
not being used.
36
Upper threading is incorrect. 42
Bobbin is set incorrectly. 40
Presser foot is attached incorrectly. 50
Screw of the presser foot holder is loose. 50
Fabric is too thick. 69
Fabric is fed forcefully when sewing thick fabric
or thick seams.
69
Stitch length is too short. 62
Stabilizer is not attached to fabric being
embroidered.
127
1 Notch
a
185


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Brother Innov-is XJ1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Brother Innov-is XJ1 in the language / languages: English as an attachment in your email.

The manual is 12,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Brother Innov-is XJ1

Brother Brother Innov-is XJ1 User Manual - German - 212 pages

Brother Brother Innov-is XJ1 User Manual - Dutch - 212 pages

Brother Brother Innov-is XJ1 User Manual - French - 212 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info