718772
187
Zoom out
Zoom in
Previous page
1/212
Next page
TROUBLESHOOTING
185
Appendix
7
After Finishing an Operation
Upper threading is incorrect. 42
A bobbin designed specifically for this machine is
not being used.
36
There are needle holes or friction scratches in the
bobbin case.
176
Fabric does not feed through the machine.
Feed dogs are set in the down position.
Press , and then turn the handwheel to
raise the feed dogs.
80
Stitches are too close together. 62
Wrong presser foot. 194
Needle is turned, bent or the point is dull. 48
Thread is entangled.
180
Zigzag foot “J” is slanted on a thick seam at the
beginning of stitching.
69
The fabric feeds in the opposite direction.
The feed mechanism is damaged.
*
The needle contacts the needle plate.
The needle clamp screw is loose. 48
Needle is turned, bent or the point is dull. 48
Fabric being sewn with the machine cannot be
removed.
Thread is tangled below the needle plate. 179
A broken needle has fallen into the machine.
Turn off the machine, and then remove the
needle plate. If the needle that fell into the
machine can be seen, use tweezers to remove
it. After removing the needle, return the needle
plate to its original position.
Before turning on the machine, slowly turn the
handwheel toward you to check that it turns
smoothly. If the handwheel does not turn
smoothly or the needle that fell into the
machine cannot be removed, consult your
authorized Brother dealer.
180
The handwheel feels sluggish when it is turned.
Thread is tangled in the bobbin case. 179
Symptom, Cause/solution
Reference
Symptom, Cause/solution
Reference
Thread tension is incorrect.
Upper threading is incorrect. 42
Bobbin is set incorrectly. 40
Using improper needle or thread for the selected
fabric.
49
Presser foot holder is not attached correctly. 50
Thread tension is set incorrectly. 62, 143
Bobbin thread is incorrectly wound. 36
Needle is turned, bent or the point is dull. 48
A bobbin designed specifically for this machine is
not being used.
36
Character or decorative stitch patterns are misaligned.
Stitch pattern adjustment settings were set
incorrectly.
97
Stitch pattern does not turn out.
Wrong presser foot. 194
Did not use a stabilizer material on thin fabrics or
stretch fabrics.
70
Thread tension is set incorrectly. 62, 143
Fabric was pulled, pushed or fed at an angle while
it was being sewn.
Sew while guiding the fabric with your hands so
that the fabric is fed in a straight line.
56
The thread is tangled, for example, in the bobbin
case.
179
187


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Brother Innov-is XJ1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Brother Innov-is XJ1 in the language / languages: English as an attachment in your email.

The manual is 12,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Brother Innov-is XJ1

Brother Brother Innov-is XJ1 User Manual - German - 212 pages

Brother Brother Innov-is XJ1 User Manual - Dutch - 212 pages

Brother Brother Innov-is XJ1 User Manual - French - 212 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info