718772
80
Zoom out
Zoom in
Previous page
1/212
Next page
UTILITY STITCHES
78
needle position) should be set to 5.50 mm (approx.
7/32 inch).
* To sew a 6.5 mm (approx. 1/4 inch) seam allowance
along the left edge of the presser foot with
selected, the width should be set to 1.50 mm
(approx. 1/16 inch).
* To change the needle position, use or in
the L/R Shift display.
Piecing Using the 1/4 Quilting Foot with Guide
This quilting foot can sew an accurate 1/4 inch or 1/8 inch
seam allowance.
It can be used for piecing together a quilt or for
topstitching.
a
Press , and then attach the 1/4 quilting foot with
guide.
b
Use the guide and marks on the presser foot to sew
accurate seam allowances.
Piecing a 1/4 inch seam allowance
Sew keeping the edge of the fabrics against the guide.
Creating an accurate seam allowance
Use the mark on the foot to begin, end, or pivot 1/4 inch
from edge of fabric.
Topstitching quilting, 1/8 inch
Sew with the edge of the fabric aligned with the left side of
the presser foot's front section.
Quilting
Sewing the quilt top, batting, and backing together is
called quilting. You can sew the quilt with the dual feed
foot to keep the quilt top, batting, and backing from
sliding. The dual feed foot has a motorized belt that moves
together with the feed dogs in the needle plate during
sewing.
For straight line quilting, use the dual feed foot and the
straight stitch needle plate.
1 6.5 mm (approx. 1/4
inch)
1 6.5 mm (approx. 1/4
inch)
In the case Q-01(center, at L/R Shift 3.5 mm) is
selected, if the guideline marker is set at 10.0 mm
(3.5 mm plus 6.5 mm, close to 1/4 inch), you can
sew piecing by referring to the guideline marker.
1 Guide
a
a
a
1 Guide
2 1/4 inch
Memo
For accurate fabric placement, refer to “Aligning
the Fabric with a Mark on the Needle Plate or
Bobbin Cover (with Mark)” on page 72.
1 Align this mark with
edge of fabric to begin.
2 Beginning of stitching
3 End of stitching
4 Opposite edge of fabric
to end or pivot
5 1/4 inch
Memo
For details on pivoting, refer to “Pivoting” on
page 65.
1 Surface of fabric
2 Seam
3 1/8 inch
a
b
a
e
e
c
d
b
a
b
c
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Brother Innov-is XJ1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Brother Innov-is XJ1 in the language / languages: English as an attachment in your email.

The manual is 12,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Brother Innov-is XJ1

Brother Brother Innov-is XJ1 User Manual - German - 212 pages

Brother Brother Innov-is XJ1 User Manual - Dutch - 212 pages

Brother Brother Innov-is XJ1 User Manual - French - 212 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info